where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

871 views
Technical Discussions
Jay Benadum
Engineering, Weld Specialist
USA, Joined Jan 2005, 1

Jay Benadum

Engineering, Weld Specialist
USA,
Joined Jan 2005
1
05:40 Jan-31-2005
Spot weld testing ????

Can someone advise me the best way to test spot welds?

Right now I am looking into Ultra sonic testing? I am looking for something that is user friendly, and easy to read, and can create a data base.


 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 283

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
283
00:42 Feb-01-2005
Re: Spot weld testing ????
You might want to consider reistivity, numerous car manufacturers use this as it can be quick and simple plus has outputs for SPC.

Talk to Physical Acoustics New Jersey about their M100 Unit.


 
 Reply 
 
Raúl Navarrete
Consultant, teacher ndt inspector
METAL-MET, C.A., Venezuela, Joined Jul 2000, 8

Raúl Navarrete

Consultant, teacher ndt inspector
METAL-MET, C.A.,
Venezuela,
Joined Jul 2000
8
02:14 Feb-01-2005
Re: Spot weld testing ????
John:

Ultrasound test gives you EASY of use, easy of finding defects and portability. IT is the best method to do this inspection. If you need more information, please, let me know. Car manufacturers has been using it for years with excelent results.

Raúl

----------- Start Original Message -----------
: Can someone advise me the best way to test spot welds?
: Right now I am looking into Ultra sonic testing? I am looking for something that is user friendly, and easy to read, and can create a data base.
------------ End Original Message ------------




 
 Reply 
 
shivakumargampa
NDT Inspector
kalva institute of NDT & quality management, India, Joined Sep 2004, 1

shivakumargampa

NDT Inspector
kalva institute of NDT & quality management,
India,
Joined Sep 2004
1
03:19 May-04-2005
how to find out defects
i am very happy,
your web site more helped me,

i more learn form your web site.

i know ultrasonic testing how to find out defects, how to tell this is porosity, or some one of the defects,


please inform me i want images

plase send me my e- mail

for
your weber
shivakumargampa




 
 Reply 
 
rubocnea
rubocnea
07:39 Nov-23-2005
rubocnea
test. ingore it. (defjens)


 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window