where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Volume Graphics GmbH
Leading industrial companies around the world look for defects in their products using Volume Graphics software.
800 views
Technical Discussions
kumar
Director,
WENS quality Assurance (S) Pte.Ltd., Singapore, Joined Jul 2003, 1

kumar

Director,
WENS quality Assurance (S) Pte.Ltd.,
Singapore,
Joined Jul 2003
1
09:13 Feb-03-2005
Neutron radiography

Could anybody tell me the density variation in a neutron radiograph for the BPI ( IQI), I would like to know which part will be higher density ( hole)& which part will be lower density ( say polyurethane foam).
If you have any example could you let me know

Thanks

Kumar


    
 
 Reply 
 
Charlie
Engineering, Ex DNV Surveyor (China)
Petronas Rapid Project, Malaysia, Joined Aug 2017, 4

Charlie

Engineering, Ex DNV Surveyor (China)
Petronas Rapid Project,
Malaysia,
Joined Aug 2017
4
01:54 Aug-31-2017
Re: Neutron radiography
In Reply to kumar at 09:13 Feb-03-2005 (Opening).

Dear Kumar

May be the following articles on Neutron Radiography would be helps;
http://www.slideserve.com/charliechong/presentations
http://www.academia.edu/14352459/Understanding_Neutron_Radiography_Reading_IV-All


Regards
Charlie
ASNT Level III NRT

    
 
 Reply 
 
Charlie
Engineering, Ex DNV Surveyor (China)
Petronas Rapid Project, Malaysia, Joined Aug 2017, 4

Charlie

Engineering, Ex DNV Surveyor (China)
Petronas Rapid Project,
Malaysia,
Joined Aug 2017
4
02:13 Aug-31-2017
Re: Neutron radiography
In Reply to kumar at 09:13 Feb-03-2005 (Opening).

Dear Kumar

Again me, to be specific the following ASTM E545 would give an insight into the neutron attenuation factor for each IQI materials in question

ASTM E545
Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination.

or read; http://www.slideserve.com/charliechong/understanding-neutron-radiography-reading-2016-v-astm-nrt-reading-1a

Hope it help.

Charlie

    
 
 Reply 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Research and Applications Development For NDT

The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
...
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window