where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

691 views
Technical Discussions
peyman mohammadpour
peyman mohammadpour
08:35 Feb-26-2005
sound absorption properties of polyester

Where can I find the frequency and/or temperature dependence of the acoustic absorption for the Low density polyester material ?

Also where can I find some helpfull information on absorption properties of polymeric materials ?

thanks so much !


 
 Reply 
 
R. Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 617

R. Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
617
00:10 Feb-27-2005
Re: sound absorption properties of polyester
You may try this forum message:

http://www.ndt.net/wshop/forum/messages-1/7463.html
Re: acoustic absorption of Low density polyethylene
Posted by: Rolf D. on September 11, 2004 at 23:55

----------- Start Original Message -----------
: Where can I find the frequency and/or temperature dependence of the acoustic absorption for the Low density polyester material ?
: Also where can I find some helpfull information on absorption properties of polymeric materials ?
: thanks so much !
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window