where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

661 views
Technical Discussions
jonathan
jonathan
08:32 Mar-29-2005
mag field indicator cal

what test equipment is needed for the calibration of field strength indicators.


    
 
 
Godfrey Hands
Consultant,
PRI Nadcap, United Kingdom, Joined Nov 1998, 293

Godfrey Hands

Consultant,
PRI Nadcap,
United Kingdom,
Joined Nov 1998
293
09:56 Mar-30-2005
Re: mag field indicator cal
----------- Start Original Message -----------
: what test equipment is needed for the calibration of field strength indicators.
------------ End Original Message ------------

Jonathan,
You will need a Calibrated Field Strength Meter plus a special fixture to hold the Field Strength Indicator as a minimum.
Equipment to do this is likely to cost around GB£2000 or more (US$3350).
The calibrated meter will also need regular calibration.
If you only have a few indicators to calibrate, most companies have them calibrated by an external source.

NDT Consultants Ltd. in the United Kingdom can offer this service for you at a cost which is currently GB£25.00 per meter plus relevant taxes and shipping.

Please contact Sales@ndt-consultants.co.uk for more information.

Regards,

Godfrey Hands


    
 
 
droitdak
droitdak
02:40 Jan-28-2006
droitdak
test. ignore it. (tiasalou)


    
 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window