where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
893 views
Technical Discussions
James JOE
R & D, Ultrasonic Specialist
ASNT,KSNT, South Korea, Joined Jan 2005, 5

James JOE

R & D, Ultrasonic Specialist
ASNT,KSNT,
South Korea,
Joined Jan 2005
5
05:13 Mar-31-2005
inclusion detection

Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?



 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Apr-01-2005
Re: inclusion detection
----------- Start Original Message -----------
: Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
------------ End Original Message ------------

Dear James,

Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?

Swamy



 
 Reply 
 
Richard Kazares
Richard Kazares
00:24 Apr-01-2005
Re: inclusion detection
I'm assuming that you mean that the plate is 2 mm thick with a 1800 mm width and 100 M per Minute speed. If that is correct, we produce various versions of in-line (fixed or semi-portable) delamination systems that can be configured for your application.

You can send me a direct e-mail and I'll provide you with more detials.


----------- Start Original Message -----------
: : Would you please let me know whick manufactuer can detect inclusion of steel plate of 2mm thickness, 1800mm width and 100MPM speed?
: Dear James,
: Could be a little more specific? Are you interested in detecting inclusions in a steel plate of 2 mm thickness as it is being produced (at the cold rolling stage)? If yes, which type of inclusion? Metallic or non-metallic? What size?
: Swamy
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

New PHAsis module for longitudinal weld seam inspection

PHAsis® Phased Array manual ultrasonic spot weld inspection device is now ideally suited for test
...
ing of longitudinally welded seams (e.g. Arplas® seam, short line seams) with a length of 3 to 12 mm.
>

32:128PR PAUT & 2-ch TOFD Flaw Detector: SyncScan 2

●32:128PR PAUT with optional 2-ch TOFD to maximize your efficiency ●Support PR mode for corrosi
...
on inspection ●Multiple solutions for welds & corrosion ●Faster scan speed (Approximately 3 meters/minute) ●Light weight: 4kg only including battery
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window