where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1210 views
Technical Discussions
Sam Azoka Onyechi
Director, NDT Practitioner
Inspection and Tests Nigeria Limited, Nigeria, Joined Jul 2004, 17

Sam Azoka Onyechi

Director, NDT Practitioner
Inspection and Tests Nigeria Limited,
Nigeria,
Joined Jul 2004
17
00:33 May-12-2005
Need for EMI Equipment

We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.



 
 Reply 
 
Frank Lund
R & D,
United Kingdom, Joined Apr 2005, 221

Frank Lund

R & D,
United Kingdom,
Joined Apr 2005
221
00:51 May-12-2005
Re: Need for EMI Equipment
NEWT International manufactures a range of EMA (Electro-Magnetic Array) equipment for crack detection. I invite you to look at the website www.lizard.co.uk or contact Steve Greenall sgreenall@lizard.co.uk

----------- Start Original Message -----------
: We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.
------------ End Original Message ------------




 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
02:50 May-12-2005
Re: Need for EMI Equipment
A search in the NDT.net Exhibition delivers 8 results for "EMAT"

1. Acoustic Control Systems Ltd.
2. ECLIPSE SCIENTIFIC PRODUCTS
3. Lucid Software Ltd
4. Matec Instrument Companies, Inc.
5. NORDINKRAFT
6. Q Net Quality Management GmbH
7. R/D Tech
8. RWE Power International

Search link:
www.ndt.net/exhibit/list.php3?orderBy=Exhibitor.name&listType=0&Method=-1&Type=-1&Country=-1&Find=emat&searchmode=AND


----------- Start Original Message -----------
: We have a need for Electro Magnetic Inspection equipment for full body inspection of tubular goods. Can anyone with info on good manufacturers of this and other Tubular inspection equipment pls assist. Many thanks.
------------ End Original Message ------------




 
 Reply 
 
David Steely
David Steely
06:08 Jun-10-2005
Re: Need for EMI Equipment
Dear Sam Azoka Onyechi:

You had posted a request for information on the ndt.net formu. Please refer to our web pages at www.pitcoinc.com for full body EMI pipe inspection equipment. Bob Leslie at bobl@scansystems.com can help you define what you need.

Best Regards

David Steely
Division Manager
Scan Systems Corporation
14424 Interdrive West
Houston, TX 77032 USA

Telephone: (281) 219-9480 x 113
FAX: (281) 219-2317

www.scansystems.com

davids@scansystems.com




 
 Reply 
 

Product Spotlight

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window