where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
523 views
Technical Discussions
Raúl Ortiz
Raúl Ortiz
07:13 May-19-2005
AISI 316 and 316L hardness

Hi, Could somebody tell me the hardness range of AISI 316 and AISI 316L steels? I´d like to Know the hardness difference between both of them.
Thank you.


    
 
 Reply 
 
tito
tito
09:49 Jun-29-2005
Re: AISI 316 and 316L hardness
----------- Start Original Message -----------
: Hi, Could somebody tell me the hardness range of AISI 316 and AISI 316L steels? I´d like to Know the hardness difference between both of them.
: Thank you.
------------ End Original Message ------------
comments
AISI type 316 =149 HB
AISI type 316L=146 HB




    
 
 Reply 
 
Eudo
Eudo
05:20 Aug-29-2005
Re: AISI 316 and 316L hardness
----------- Start Original Message -----------
: Hi, Could somebody tell me the hardness range of AISI 316 and AISI 316L steels? I´d like to Know the hardness difference between both of them.
: Thank you.
------------ End Original Message ------------

Please tell me about the diference between din 1.4404 and din 12083.And I'd like to know the hardness difference between both of them.


    
 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window