where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

259 views
Technical Discussions
M.Mehdizadeh
M.Mehdizadeh
02:19 May-24-2005
EMAT

Dear Sir/ Madam,
It's our pleasure to introduce you Niroo Research Institute (NRI). NRI affiliated to the Ministry of Energy, is the main research institute working comprehensively in the field related to power industries and plants in Iran.
We as one part of NRI research groups, in materials department, are the main consultants of Iranian power plants in the field of utilizing NDT techniques for steam power plant components inspection. In order to buy an EMAT system we found your company has excellent abilities and experiences in this field so, we would be so grateful if you could help us by introducing us a system with the following specifications.

1- We need a system for thickness measurements of steam-side oxide layer
(inner scale) of boiler tubes (Natural gas, fuel oil and gasoline fuel power plants) with out surface preparation in ambient temperature and thickness measurements of boiler tubes (Carbon steels, ferritic-pearlitic steels and austenitic steels).

2- Would you please send us the specifications of a system that can provide the requirements mentioned in 1? The types of appropriate probes, related
soft wares, kind of Calibration test blocks, any specific training course and approximate price are also needed.

3- How are the results of thickness measurements displayed?

Looking forward to hearing from you.
Sincerely yours,
M.Mehdizadeh,
Project manager,
Niroo Research Institute,
Fax: (+98-21) 8590532 , Tel (+98-21) 8079401-8
End of Pounak-e-Bakhtari Blvd., Shahrak-e-Gharb




 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window