where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

636 views
Technical Discussions
Maarten Nijsse
Trainee
Smit, Netherlands, Joined Dec 2004, 2

Maarten Nijsse

Trainee
Smit,
Netherlands,
Joined Dec 2004
2
06:44 May-24-2005
Detecting Carbon residue within laminated paper with non-distructive measures in the field

Can anyone point out a methode for detecting carbon residue (from partial or electric discharges) within laminated paper without distroying the paper. This methode must preferable be quick and safe without any x-ray-methode (because of the large scaled object under test). or is it possible to detect it with a metaldetector used for tracking metal object in te ground (used by amuteur treasure-finders)?

Thnx for your afford,
Yours sincerely,

Maarten Nijsse


    
 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 785

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
785
09:54 May-25-2005
Re: Detecting Carbon residue within laminated paper with non-distructive measures in the field
----------- Start Original Message -----------
: Can anyone point out a methode for detecting carbon residue (from partial or electric discharges) within laminated paper without distroying the paper. This methode must preferable be quick and safe without any x-ray-methode (because of the large scaled object under test). or is it possible to detect it with a metaldetector used for tracking metal object in te ground (used by amuteur treasure-finders)?
: Thnx for your afford,
: Yours sincerely,
: Maarten Nijsse
------------ End Original Message ------------

Dear Maarten,

Eddy current should in principle be capable of detecting the carbon residue, since paper is an insulator and carbon is a conductor. The metal detector also works on similar principle but the sensor may be too coarse for this application.

Swamy





    
 
 

Product Spotlight

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window