where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Materials Research Institute
Consulting to the NDT industry.
374 views
Technical Discussions
DEBDUTTA MALLIK
Consultant,
Malaysia, Joined Jun 2005, 37

DEBDUTTA MALLIK

Consultant,
Malaysia,
Joined Jun 2005
37
06:22 Jun-06-2005
NDT OF RAIL

I want to discuss regarding online and offline testing of rail.
Plz join.

Thanks

Debdutta Mallik


 
 Reply 
 
Ethan Sandahl
Ethan Sandahl
02:15 Jun-06-2005
Re: NDT OF RAIL
----------- Start Original Message -----------
: I want to discuss regarding online and offline testing of rail.
: Plz join.
: Thanks
: Debdutta Mallik
------------ End Original Message ------------

Hello Debdutta,

What sort of testing do you want to perform on the rail? Are you following any certain code, or prefer one NDT technique over another? There are many ways to test rail and have many papers written about techniques. The ASNT handbook has an excellent section on rail, wheel and axle analysis. Much of the work from the ASNT handbook was developed by Sperry Rail, Harsco (now part of Sperry) and the American Association of Railraod (AAR)
Best regards

ethan


 
 Reply 
 

Product Spotlight

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window