where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

434 views
Technical Discussions
Posakony, G. J.
Posakony, G. J.
06:57 May-21-1999
Transducer Characterization

In response to the request for test methods for characterizing ultrasonic transducers, please refer to ASTM E1065, "Standard Guide for Evaluating Characteristics of Ultrasonic Search Units". This Guide is was written to establish a common means for performing evaluations. It describes procedures for both shock excitation and sinusoidal burst techniques. If there are other questions, please e-mail me at the above address.

GJP.


    
 
 
Javier Modenesi
Javier Modenesi
04:47 Sep-03-2000
Re: Transducer Characterization
: In response to the request for test methods for characterizing ultrasonic transducers, please refer to ASTM E1065, "Standard Guide for Evaluating Characteristics of Ultrasonic Search Units". This Guide is was written to establish a common means for performing evaluations. It describes procedures for both shock excitation and sinusoidal burst techniques. If there are other questions, please e-mail me at the above address.

: GJP.




    
 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Digital Radiography for Concrete Inspection

In the construction industry (buildings, bridges) there is a need for fast non- destructive means,
...
most commonly to locate targets (Pipes, Re-bars, Conduit, Fittings etc.) within concrete structures prior to drilling, cutting or coring. Measuring reinforcements is also performed for static calculations and to detect corrosion problems and damages. Cracks and voids can also be visualized. The examinations are not only restricted to concrete constructions; they can also be applied to reinforced masonry made of natural stones or bricks.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Spot weld inspection with Phased Array – PHAsis.one

The first PAUT spot weld inspection device offering a physical resolution of the spot weld diamete
...
r better than 0.35mm. Precise: more than 700 real UT measurements per spot weld. Easy to go: minimal training required due to the user friendly inspection software. Be sure: safe evaluation due to the imaging result display and automated creation of an evaluation proposal for the spot weld quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s