where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
471 views
Technical Discussions
Eric Muck
Eric Muck
09:21 Oct-01-1998
Re: vendors for acoustic microscope and componenets

: : I'm trying to locate vendors for acoustic microscopes and/or components in the frequency range of about 1GHz. I'm specifically trying to locate vendors for an appropriate 1GHz puler/receiver.

: : Any suggestions? --Jane

: Try Olympus in Japan




 
 Reply 
 
John Goings
John Goings
07:46 Nov-03-1998
Re: vendors for acoustic microscope and componenets
: : I'm trying to locate vendors for acoustic microscopes and/or components in the frequency range of about 1GHz. I'm specifically trying to locate vendors for an appropriate 1GHz puler/receiver.

: : Any suggestions? --Jane

: Try Olympus in Japan

: Contact acoustic microscopes can operate in that frequency range, but that frequency sound can barely pentrate into a sample. My company, SONIX Inc., sells acoustic microscopes that operate in the MHz range (5-300MHz) geared towards the semiconductor and NDT industries.


 
 Reply 
 
yuyingann
yuyingann
03:30 Aug-06-2000
Re: vendors for acoustic microscope and componenets
: : I'm trying to locate vendors for acoustic microscopes and/or components in the frequency range of about 1GHz. I'm specifically trying to locate vendors for an appropriate 1GHz puler/receiver.

: : Any suggestions? --Jane

: Try Olympus in Japan




 
 Reply 
 
shany joseph
shany joseph
00:44 Oct-17-2000
Re: vendors for acoustic microscope and componenets
: : I'm trying to locate vendors for acoustic microscopes


 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window