where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Matec Instrument Companies, Inc.
Ultrasonic test instrumentation and systems for scientific research, quality control inspection and production testing applications.
262 views
Technical Discussions
Jaques Townsend
NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç, Brazil, Joined Mar 2001, 13

Jaques Townsend

NDT Inspector
ULTRASOM Logística Townsend & Rocha Almeida Serviç,
Brazil,
Joined Mar 2001
13
09:32 Aug-24-2005
UT at insolation integrity detecting criterea

Can some one help me by sending what will be the range scaning when at isolators integrity checking by using the ultrasound dectector like follows:
at high voltage between 13,8kV & 138kV our great difficult is to stabilish the inspecting criterea, by the way at now we`re using:
at 7 dBmV to 0 dBmV ----- good isolator
at 1 dBmV to 10 dBmV ----- needing ground isolation measure soon as possible
more than 10 dBmV ---- imediatly repair or replacement
Can you send me more informations about measurement criterea to Corona effect limits?
Thank you.




    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window