where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

820 views
Technical Discussions
Nick Welland
Nick Welland
03:23 Dec-01-2005
RT of round bar

I know this is one of the old theoretical problems, but has anyone successfully radiographed, under field conditions, a 75 mm diameter steel round bar, for weld defects?

Any help would be appreciated.

BestRegards,
Nick


 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
00:56 Dec-03-2005
Re: RT of round bar
Dear Nick,

The curvature of the bar has to be corrected using correction blocks so that the thickness across the weld remains uniform. For that thickness, either a very high voltage x-ray source or Ir-192 source is needed. You may need multiple exposures with the bar being rotated by 90 or 120 degrees. I have not done it but it should be possible. Pl. make an artificial defect standard in the bar and try it out.

Best wishes.

S.V.Swamy

----------- Start Original Message -----------
: I know this is one of the old theoretical problems, but has anyone successfully radiographed, under field conditions, a 75 mm diameter steel round bar, for weld defects?
: Any help would be appreciated.
: BestRegards,
: Nick
------------ End Original Message ------------




 
 Reply 
 
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
05:33 Mar-05-2006
Re: RT of round bar
Hi Nick,

I thought you were a UT hand? I'm taking my RT 2 this week and I'll use it for some math problems and then try it out... don't know how many times I'll need to shoot it but I'm sure it'll be plenty.

DH


----------- Start Original Message -----------
: I know this is one of the old theoretical problems, but has anyone successfully radiographed, under field conditions, a 75 mm diameter steel round bar, for weld defects?
: Any help would be appreciated.
: BestRegards,
: Nick
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window