where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

297 views
Technical Discussions
Greg Kawchuk
Greg Kawchuk
00:32 Jan-26-2001
Depth gauges that interface with LabView


Hi everyone,

My name is Greg Kawchuk and I am a biomechanics researcher at the University of Calgary.

I would like to know if anyone might be aware of a self-contained, ultrasonic depth gauge that interfaces with LabView (for control of the instrument and/or data collection).

I've checked the archives and most of the material their regarding this topic was quite dated.

Thanks in advance.


    
 
 
Pim van Andel
Pim van Andel
09:02 Jan-26-2001
Re: Depth gauges that interface with LabView
:
: Hi everyone,

: My name is Greg Kawchuk and I am a biomechanics researcher at the University of Calgary.

: I would like to know if anyone might be aware of a self-contained, ultrasonic depth gauge that interfaces with LabView (for control of the instrument and/or data collection).

: I've checked the archives and most of the material their regarding this topic was quite dated.

: Thanks in advance.

-----------------------------------
Hi Greg,

We use Labview for our custom build ultrasonic systems. What type of depth gauge do you need?

Pim van Andel




    
 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window