where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

WesDyne International (AMDATA Products)
WesDyne is an engineering and technical services firm dedicated to providing standard and custom nondestructive examinations (NDE) products and systems
407 views
Technical Discussions
Mark Davis
Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama, USA, Joined Mar 2000, 85

Mark Davis

Teacher, And Consultant
University of Ultrasonics, Birmingham, Alabama,
USA,
Joined Mar 2000
85
04:03 Jan-20-2006
Barkhausen for Creep Damage

I would be interested in talking to anyone who has used Barkhausen Noise techniques for the early detection of creep damage in materials.

Can Barkhausen techniques be used successfully for non destructive evaluation of high grade stainless steels (e.g. hastelloy, 1.4435 etc?)


    
 
 Reply 
 
Changqing Lee
Changqing Lee
03:29 Jan-24-2006
Re: Barkhausen for Creep Damage
I found one paper on this topic. I hope this helps.

Title:
Modeling incipient creep damage effects on Barkhausen noise and magnetoacoustic emission

Authors:
Sablik, M. J.; Augustyniak, B.; Piotrowski, L.

Affiliation:
AA(Southwest Research Institute, P.O.Drawer 28510, 6220 Culebra Road, San Antonio, TX 78228-0510, USA; msablik@swri.org), AB(Physics Department, Technical University of Gdansk, ul. Narutowicza 11/12, Gdansk PL-80-952, Poland), AC(Physics Department, Technical University of Gdansk, ul. Narutowicza 11/12, Gdansk PL-80-952, Poland)

Journal:
Journal of Magnetism and Magnetic Materials, Volume 272, p. E523-E525.

Publication Date:
05/2004

----------- Start Original Message -----------
: I would be interested in talking to anyone who has used Barkhausen Noise techniques for the early detection of creep damage in materials.
: Can Barkhausen techniques be used successfully for non destructive evaluation of high grade stainless steels (e.g. hastelloy, 1.4435 etc?)
------------ End Original Message ------------




    
 
 Reply 
 

Product Spotlight

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window