where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

497 views
Technical Discussions
zahir
zahir
06:49 Feb-05-2006
ECT Technical Standard

Hi.
I'm looking for technical standard EN 1711: 1999 NDE of welds - Eddy Current examination of welds by complex plane analysis.
Does anybody know about the standard & how can i get a copy of this standard.
TQ


 
 Reply 
 
Fred Raco Jr
Consultant,
RNDT, Inc., USA, Joined Jul 2002, 24

Fred Raco Jr

Consultant,
RNDT, Inc.,
USA,
Joined Jul 2002
24
06:01 Feb-06-2006
Re: ECT Technical Standard
DIN EN 1711 - Complete Document
Revision: 00 Chg: Date: 03/00/00
NON-DESTRUCTIVE EXAMINATION OF WELDS EDDY CURRENT EXAMINATION OF WELDS BY COMPLEX PLAN ANALYSIS

Comments: ENGLISH
Superseding Document:
Page Count: 21
In Stock: Yes
Hardcopy Price: $ 216.00
www.global.ihs.com

----------- Start Original Message -----------
: Hi.
: I'm looking for technical standard EN 1711: 1999 NDE of welds - Eddy Current examination of welds by complex plane analysis.
: Does anybody know about the standard & how can i get a copy of this standard.
: TQ
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Echomac® PA Bar Tester

The Echomac® PA BT provides 100% inspection of round bars for core and surface defects, at speeds u
...
p to 2 m/sec, depending on the specific application. The unit allows producers to handle a much larger range of diameters in one installation, and is available in 3 models to test 10 – 75mm diameter (small model); 20 – 130mm (medium model) or 50 – 254mm (large model) bars.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window