where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
411 views
Technical Discussions
Sami Rizkalla
Sami Rizkalla
03:24 Jun-25-1999
needed NDT Ph.D. metallurgy


Immediate Opening
We are looking for some one with Ph.D. in metallurgy to supervise and prepare report for Petrochemical Vessels in Mexico for:
Eddy Current
Hardness
Metallographic Replica

Please send resume and hourly rate. Reply by e-mail or Fax: (732) 888-6180




 
 Reply 
 
AKSHT AGRAWAL
AKSHT AGRAWAL
07:36 Jun-25-1999
Re: needed NDT Ph.D. metallurgy

This is with reference to your advertisement on the web site "ndt.net" for NDT engineer.

I have done M.Tech in Metallurgical Engineering and Material Science from Indian Institute of Technology, Kanpur. For the last three years serving in the Indian Oil Corpn. Ltd. as Inspection Engineer. My job involves health monitoring of all static equipment and quality control of piping fabricattion job. I have done Radiography Testing Level-II course.

My bio-data is enclosed for your kind perusal. Please let me know if you have any suitable post for me.

Thanking you,


AKSHAT AGRAWAL
14/20 PO Jawaharnagar
GUJARAT REFINERY TOWNSHIP
VADODARA-391 320
INDIA

Ph. no. : 0265-306344


_______________________________________________________

RESUME

Name : Akshat Agrawal

Father's Name : (Late) Shri Sushil Kumar Agrawal

Date of Birth (Age) : 8th August, 1971 ( 27 years)

Permanent Address : 14/20, Gujarat Refinery Township
Jawaharnagar, Vadodara - 391 320

Nationality : Indian

Language known : Hindi, English

Marital Status : Married

Passport No. : S 741003 valid up to 15/07/2005

Educational Qualification
--------------------------------------------
Degree Institution Period CGPA*
--------------------------------------------
B Tech (Metallurgy) IT-Banaras Hindu University 1990-94 6.0 / 10.0
M Tech (Metallurgy IIT - Kanpur 1994-96 8.7 / 10.0
& Material Science)
--------------------------------------------
* CGPA - Cumulative Grade Point Average

B Tech Thesis : Design of wear testing machine and wear characteristics of Al-Si alloy.
M Tech Thesis : Ageing characteristics of 17-7 precipitation hardening stainless steel.

VOCATIONAL TRAINING
--------------------------------------------
Organization Duration Shop
--------------------------------------------
HAL (Bangalore) 30 days Foundry and Forge division
SAIL (Bokaro) 25 days Steel Melting Shop - II
LML (Kanpur) 30 days Welding, Heat treatment and
pressure die casting shops
--------------------------------------------

JOB PROFILE
--------------------------------------------
ORGANISATION DATE OF JOINING DESIGNATION
--------------------------------------------
Gujarat Refinery, 20 /09 / 96 INSPECTION ENGINEER
P.O Jawaharnagar,
IOCL, Vadodara-391 320
--------------------------------------------

PROFESSIONAL EXPERIENCE

* Corrosion problem and material selection in refinery and petro-chemical industries.
* Inspection of Feed Preparation Unit-II, Sulfur Recovery Unit & Primary Distillation Unit.
* Health monitoring and repair of static equipment - Furnaces, Pressure vessels, Columns, Heat exchangers & Tanks.
* Familiarity with inspection codes and standards(ASTM, ASME, API, ISI).
* Material identification and testing.
* QA/ QC of piping fabrication jobs.

COMPUTER SKILLS

* Conversant with MS Office and AutoCAD.

PROFESSIONAL COURSES
--------------------------------------------
SUBJECT ORGANISATION/ INSTITUTION DURATION (DAYS)
--------------------------------------------
Radiography Bhabha Atomic Research Center 30
Testing Level-II Mumbai

Corrosion in Electrical Research &Development 3
Process Industries Association , Vadodara

Fractography and Indian Institute of Technology 3
Failure Analysis Mumbai

ISO 9002 & ISO 14001 Gujarat Refinery , Vadodara 2
Awareness course

Welding Qualification ADOR Institute of Welding 3
& Records Technology, Mumbai

HRSG - Design & Bharat Heavy Electrical Ltd. , 5
Operation Trichurapalli
-------------------------------------------------


(AKSHAT AGRAWAL)




 
 Reply 
 
pejman keshmiry
pejman keshmiry
00:36 Nov-17-1999
Re: needed NDT Ph.D. metallurgy

: This is with reference to your advertisement on the web site "ndt.net" for NDT engineer.

: I have done M.Tech in Metallurgical Engineering and Material Science from Indian Institute of Technology, Kanpur. For the last three years serving in the Indian Oil Corpn. Ltd. as Inspection Engineer. My job involves health monitoring of all static equipment and quality control of piping fabricattion job. I have done Radiography Testing Level-II course.

: My bio-data is enclosed for your kind perusal. Please let me know if you have any suitable post for me.

: Thanking you,

:
: AKSHAT AGRAWAL
: 14/20 PO Jawaharnagar
: GUJARAT REFINERY TOWNSHIP
: VADODARA-391 320
: INDIA

: Ph. no. : 0265-306344

:
: _______________________________________________________

: RESUME

: Name : Akshat Agrawal

: Father's Name : (Late) Shri Sushil Kumar Agrawal

: Date of Birth (Age) : 8th August, 1971 ( 27 years)

: Permanent Address : 14/20, Gujarat Refinery Township
: Jawaharnagar, Vadodara - 391 320

: Nationality : Indian

: Language known : Hindi, English

: Marital Status : Married

: Passport No. : S 741003 valid up to 15/07/2005

: Educational Qualification
: --------------------------------------------
: Degree Institution Period CGPA*
: --------------------------------------------
: B Tech (Metallurgy) IT-Banaras Hindu University 1990-94 6.0 / 10.0
: M Tech (Metallurgy IIT - Kanpur 1994-96 8.7 / 10.0
: & Material Science)
: --------------------------------------------
: * CGPA - Cumulative Grade Point Average

: B Tech Thesis : Design of wear testing machine and wear characteristics of Al-Si alloy.
: M Tech Thesis : Ageing characteristics of 17-7 precipitation hardening stainless steel.

: VOCATIONAL TRAINING
: --------------------------------------------
: Organization Duration Shop
: --------------------------------------------
: HAL (Bangalore) 30 days Foundry and Forge division
: SAIL (Bokaro) 25 days Steel Melting Shop - II
: LML (Kanpur) 30 days Welding, Heat treatment and
: pressure die casting shops
: --------------------------------------------

: JOB PROFILE
: --------------------------------------------
: ORGANISATION DATE OF JOINING DESIGNATION
: --------------------------------------------
: Gujarat Refinery, 20 /09 / 96 INSPECTION ENGINEER
: P.O Jawaharnagar,
: IOCL, Vadodara-391 320
: --------------------------------------------

: PROFESSIONAL EXPERIENCE

: * Corrosion problem and material selection in refinery and petro-chemical industries.
: * Inspection of Feed Preparation Unit-II, Sulfur Recovery Unit & Primary Distillation Unit.
: * Health monitoring and repair of static equipment - Furnaces, Pressure vessels, Columns, Heat exchangers & Tanks.
: * Familiarity with inspection codes and standards (ASTM, ASME, API, ISI).
: * Material identification and testing.
: * QA/ QC of piping fabrication jobs.

: COMPUTER SKILLS

: * Conversant with MS Office and AutoCAD.
:
: PROFESSIONAL COURSES
: --------------------------------------------
: SUBJECT ORGANISATION/ INSTITUTION DURATION (DAYS)
: --------------------------------------------
: Radiography Bhabha Atomic Research Center 30
: Testing Level-II Mumbai

: Corrosion in Electrical Research &Development 3
: Process Industries Association , Vadodara

: Fractography and Indian Institute of Technology 3
: Failure Analysis Mumbai

: ISO 9002 & ISO 14001 Gujarat Refinery , Vadodara 2
: Awareness course

: Welding Qualification ADOR Institute of Welding 3
: & Records Technology, Mumbai

: HRSG - Design & Bharat Heavy Electrical Ltd. , 5
: Operation Trichurapalli
: -------------------------------------------------
:

:
: (AKSHAT AGRAWAL)




 
 Reply 
 

Product Spotlight

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

NovaScope 6000

The all-digital Novascope 6000 is a portable, ultra-high precision thickness gauge for high-speed
...
thickness measurement. Novascope 6000 has unmatched capabilities and unique features including: •Superior Resolution with high contrast, high-speed color RF display •High pulser voltage •Real-time video output •Increased internal/external data storage •Programmable SetUp features •Battery & AC Powered
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window