where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GRANPECT COMPANY Ltd
GRANPECT, X-ray NDT Expert You Can Rely on

474 views
Technical Discussions
Yoke
Yoke
08:08 Feb-25-2006
Omniscan

Hi all,

Has any of you been using Omniscan (by R/D Tech)? I wonder if the acquired data can be further processed on PC without Tomoview software. Perhaps the data collected can be readily exported to text file or excel file in PC?
Thanks beforehand.

Yoke


    
 
 
Eric Pelletier
Eric Pelletier
06:54 Feb-27-2006
Re: Omniscan
Mr.,
You can use free software "TomoViewer" to visualize your data on PC (www.rd-tech.com). However, if you want to export data to text file or excel file you can use the "NDTdataAccess" library. Contact directly Olympus NDT for more information "http://www.rd-tech.com/contactus.html".
Eric

----------- Start Original Message -----------
: Hi all,
: Has any of you been using Omniscan (by R/D Tech)? I wonder if the acquired data can be further processed on PC without Tomoview software. Perhaps the data collected can be readily exported to text file or excel file in PC?
: Thanks beforehand.
: Yoke
------------ End Original Message ------------




    
 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

GEKKO, Standard and Advanced phased-array for Easier inspection

With a 64-channel parallel architecture, GEKKO is a flaw detector offering at the same time conven
...
tional UT, standard PAUT, TOFD and real-time Total Focusing Method (TFM). GEKKO improves the detection, with better defects characterization and sizing as well as for misoriented defects. Some procedures require standard UT, others TOFD or PA. GEKKO includes all these techniques to offer a versatile and field-ready equipment. - 64:64 parallel channels - + 4 additional TOFD - Conventional UT channels - International code compliance: ASME, AWS, API, ASTM, ISO-EN Watch the video: https://youtu.be/kuEY_RwWS3Q
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s