where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

DASEL SISTEMAS
Our Phased Array equipments, based on SITAU Technology, are among the PAS highest performance in the market.

609 views
Technical Discussions
JP Reymondin
Engineering, Professor
Haute Ecole d'Ingénierie et de Gestion Vaud, Switzerland, Joined Jul 2007, 3

JP Reymondin

Engineering, Professor
Haute Ecole d'Ingénierie et de Gestion Vaud,
Switzerland,
Joined Jul 2007
3
09:03 Apr-10-2006
Penetrant Testing

Hello,
Is it possible to know if Penetrant Testing Developers contain small amount of alumina.
Thanks for all Answers
JP



    
 
 
Mike Trinidad
Consultant,
LMATS Pty Ltd , Australia, Joined Jan 2003, 138

Mike Trinidad

Consultant,
LMATS Pty Ltd ,
Australia,
Joined Jan 2003
138
07:05 Apr-12-2006
Re: Penetrant Testing
Most the suppliers have MSDS which list all of the ingredients in their products. Most of them can be found on their websites for download, just need the brand name and identifier.

----------- Start Original Message -----------
: Hello,
: Is it possible to know if Penetrant Testing Developers contain small amount of alumina.
: Thanks for all Answers
: JP
------------ End Original Message ------------




    
 
 

Product Spotlight

High Resolution Industrial CT System for Small/Medium Size Parts Inspection

The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection res
...
ults for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
>

Echomac® PA Rail Wheel Tester

MAC introduces two versions of Rail Wheel Testers using ECHOMAC® PA platform based on customer requ
...
irements.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window