where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

735 views
Technical Discussions
tomas perez a.
tomas perez a.
04:18 Apr-13-2006
ut flaws.

Hi.....I would like to get any information about UT flaws in metal pieces......Any manufacturers?

thanks.


 
 Reply 
 
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
05:53 Apr-13-2006
Re: ut flaws.
Which country? For flaws in welds here is the link of very experienced test piece manufacturers

www.sonaspection.co.uk


----------- Start Original Message -----------
: Hi.....I would like to get any information about UT flaws in metal pieces......Any manufacturers?
: thanks.
------------ End Original Message ------------




 
 Reply 
 
Martin Peacock
Martin Peacock
04:21 Apr-13-2006
Re: ut flaws.
----------- Start Original Message -----------
: Hi.....I would like to get any information about UT flaws in metal pieces......Any manufacturers?
: thanks.
------------ End Original Message ------------
We at Sonaspection International manufacture Flawed Specimens for UT. Please visit our website www.sonaspection.co.uk or e-mail with your requirements.





 
 Reply 
 
fabio mussa
Engineering,
SAIPEM SpA, Italy, Joined Dec 2002, 9

fabio mussa

Engineering,
SAIPEM SpA,
Italy,
Joined Dec 2002
9
05:26 Apr-13-2006
Re: ut flaws.
You can see on www.trueflaw.com
It is a Finnish company, specialized in natural and articial defects for NDE calibration blocks

regards

fabio mussa
----------- Start Original Message -----------
: Hi.....I would like to get any information about UT flaws in metal pieces......Any manufacturers?
: thanks.
------------ End Original Message ------------




 
 Reply 
 
George Pherigo
George Pherigo
06:49 Apr-14-2006
Re: ut flaws.
----------- Start Original Message -----------
: Hi.....I would like to get any information about UT flaws in metal pieces......Any manufacturers?
: thanks.
------------ End Original Message ------------

Tomas:

FlawTech is a company in the USA that specializes in "real flaw" implants in metal components and welds.

Check out our web site at www.FlawTech.com


 
 Reply 
 

Product Spotlight

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window