where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1706 views
Technical Discussions
Nigel
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
01:05 Apr-14-2006
Heat Exchanger tube inspection

We have 3 H/ex's for tube inspection during a forthcoming shutdown - 1 straight st/st tubes, 1 straight c/st tubes and 1 U-bundle c/st. Tube diameters ca. 20mm and wall thickness from 2 - 7 mm. The tubesheets are welded to the shell. We are located in Kazakhstan. Does anyone know companies providinig appropriate service inspections (ET, RFET, IRIS) in Kazakhstan or neighbouring countries? Will be grateful for any links or contacts. Thanks. Nigel Armstrong


 
 Reply 
 
Andreas Boenisch
Andreas Boenisch
05:18 Apr-14-2006
Re: Heat Exchanger tube inspection
Nigel,
as we are focusing at Heat Exchanger Tube Inspection,
we are mainly operating in the UK, Norway, Middle East & Asia. Local assistance with a local based company would be of advantage in your requested region.
Feel free to contact me for more details:

Andreas Boenisch
innospection Ltd. (UK)
webpage: www.innospection.com

----------- Start Original Message -----------
: We have 3 H/ex's for tube inspection during a forthcoming shutdown - 1 straight st/st tubes, 1 straight c/st tubes and 1 U-bundle c/st. Tube diameters ca. 20mm and wall thickness from 2 - 7 mm. The tubesheets are welded to the shell. We are located in Kazakhstan. Does anyone know companies providinig appropriate service inspections (ET, RFET, IRIS) in Kazakhstan or neighbouring countries? Will be grateful for any links or contacts. Thanks. Nigel Armstrong
------------ End Original Message ------------




 
 Reply 
 
Ingo Becker
Engineering, NDT Inspector & Sales
ec-works GmbH, Germany, Joined Apr 2000, 31

Ingo Becker

Engineering, NDT Inspector & Sales
ec-works GmbH,
Germany,
Joined Apr 2000
31
02:06 Apr-18-2006
Re: Heat Exchanger tube inspection
Hello Nigel,

we are a high-quality NDT company for every kind of eddy current tube inspections. With regards to your requested region, our experts we have carried out several jobs in USBEKISTAN and of course in the Middle East and India.

Please contact me for further information.


Best regards

Ingo Becker
EDT Level III Engineer



 
 Reply 
 
M. Moeini
M. Moeini
06:57 Apr-18-2006
Re: Heat Exchanger tube inspection
----------- Start Original Message -----------
: We have 3 H/ex's for tube inspection during a forthcoming shutdown - 1 straight st/st tubes, 1 straight c/st tubes and 1 U-bundle c/st. Tube diameters ca. 20mm and wall thickness from 2 - 7 mm. The tubesheets are welded to the shell. We are located in Kazakhstan. Does anyone know companies providinig appropriate service inspections (ET, RFET, IRIS) in Kazakhstan or neighbouring countries? Will be grateful for any links or contacts. Thanks. Nigel Armstrong
------------ End Original Message ------------

We are an Iranian company with a very good experience in ET & RFET inspection for heat exchangers tubes. please refer to our website www.tubi-tak.com for further information and contact us if interested in cooperation.

Regards,
M. Moeini
Chairman Deputy


 
 Reply 
 
Philippe Beaubeau
Philippe Beaubeau
01:11 Apr-19-2006
Re: Heat Exchanger tube inspection
----------- Start Original Message -----------
Hi Nigel,

Euro Physical Acoustics (FR) can perform tubing inspection with ET/RFET/IRIS everywhere in the world.
Mainly, we make jobs in Europe and Africa.
We have several set of each NDT method.
If you want to receive a quotation, it should be necessary to get more technical features of each H/ex.
Don't hesitate to contact us for more information.
B R
Philippe Beaubeau
ET Level III


: We have 3 H/ex's for tube inspection during a forthcoming shutdown - 1 straight st/st tubes, 1 straight c/st tubes and 1 U-bundle c/st. Tube diameters ca. 20mm and wall thickness from 2 - 7 mm. The tubesheets are welded to the shell. We are located in Kazakhstan. Does anyone know companies providinig appropriate service inspections (ET, RFET, IRIS) in Kazakhstan or neighbouring countries? Will be grateful for any links or contacts. Thanks. Nigel Armstrong
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window