where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1979 views
Technical Discussions
David Hermanutz
Consultant,
Hbndt.com, China, Joined Jul 2012, 85

David Hermanutz

Consultant,
Hbndt.com,
China,
Joined Jul 2012
85
08:29 May-16-2006
Wiring diagram for Magnaflux Model KCH-3D 1957

Hi,

I'm looking to modify my cable unit and require a wiring diagram for the following equipment.

Magnaflux Model KCH-3D
USAF Stock # 7CAD-444500
220 /440 Volts 60 cycles
Max Line Amp 200 / 100

Date of manufacture September 1957 (it's still in new condition!)

Any help would be most appreciated.

DH


 
 Reply 
 
Nick
Nick
16:30 Mar-20-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to David Hermanutz at 08:29 May-16-2006 (Opening).

Download

A long time later, but here is the diagram for anyone else who is looking for it
 
 Reply 
 
Albert
Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation, USA, Joined Jun 2012, 140

Albert

Other, ASNT NDT Level III (MT, PT, UT and ET )
Aviation,
USA,
Joined Jun 2012
140
21:34 Mar-22-2013
Re: Wiring diagram for Magnaflux Model KCH-3D 1957
In Reply to Nick at 16:30 Mar-20-2013 .

Also, i have emailed Magnaflux and was able to get wiring diagrams from them with very little trouble.

 
 Reply 
 

Product Spotlight

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window