where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
519 views
Technical Discussions
ranjeet singh
Engineering, Asst.Manager-Condition Monitoring
TATA chemicals ltd.(fertilizer div.), India, Joined May 2006, 6

ranjeet singh

Engineering, Asst.Manager-Condition Monitoring
TATA chemicals ltd.(fertilizer div.),
India,
Joined May 2006
6
01:47 May-19-2006
Ferrite Measurement in Reformer catalyst tube material Manurite 36X

We are operating a Ammonia plant (capacity 1700 TPD) and Urea plant (capacity 2250 TPD) .

We have reformer having following details:
Thickness (msw) : 11.3 mm
Material of tube : Manuarite 36X (Cr25%,Ni 35%,Nb)
Length of tube : 13.65 Mts
No of burner : 432 ( side fired )

We have measured ferrite no.using Elcometer banana type and found that in one of the tube FN is 13.5 .
Let me know how much is allowed in such centrifugally casted tube in high temp.environment.
As per our knowlege 13.5 FN means 13.5% austinite has converted into ferrite strcuture

Awaiting your reply,

Best regards,



    
 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window