where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network

All Forum Boards
Technical Discussions >
UT Immersion system
Career Discussions
Job Offers
Job Seeks
Classified Ads
About NDT.net
Articles & News

2868 views
05:02 Jun-21-2006
Sunny
UT Immersion system

Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide

Thanks


 
09:25 Jun-21-2006
Simon Amallraja
Re: UT Immersion system ----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------

We, Mahindra Intertrade Ltd has built many Immersion Tank systems for various Customers in India. We can supply Manipulators, Electronics, Software etc., depends on application and Customer reqts.

For further details, contact us.

Regards.

D.Simon Amallraja


 
05:19 Jun-22-2006

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1094
Re: UT Immersion system This is the link for Midas (ex-Meccasonics people) who manufacture immersion systems in the UK:

www.midas-ndt.co.uk

----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------




 
03:44 Jun-22-2006

Athanasios Anastasopoulos

Director, Business Development, Sales & Engineering
Mistras Group,
Greece,
Joined Jan 2000
14
Re: UT Immersion system ----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------

Have a look at the following manufacturers:

http://www.ndtautomation.com

http://www.olympusndt.com

We develope and supply analysis and evaluation s/w, UTIA, specially designed for immersion systems. For additional info please visit www.envirocoustics.gr or specifically for UTIA
http://www.envirocoustics.gr/software/utia/utia_eng.htm



 
04:44 Jun-22-2006

Phil Thayer

Sales, -
MISTRAS Products & Systems,
USA,
Joined Feb 2002
12
Re: UT Immersion system ----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------

We, NDT Automation manufacture a full range of immersion systems from small lab systemss to large industrial scanners. NDTA manufactures our own UT system cards (including GE approval for disc inspection). Please visit our web site at www.ndtautomation.com


 
05:46 Jun-22-2006
Shmuel Saitowitz
Re: UT Immersion system ----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------

ScanMaster Systems is the world's leader in the supply of ultrasonic inspection systems with over 300 installations world wide. ScanMaster has approvals from the large aerospace manufactures such as GEAE, Rolls Royce, MTU, Snecma and Pratt & Whitney. Systems are installed at customers like GE, Pratt & Whitney, Aubert Duvall/Fortech, MTU, TEI, Denel Aerospace, Boeing, Wyman Gordon, Boeing, amongst many others.

ScanMaster has local representation all over the world and service and support in all countries where installations have taken place.





 
08:38 Jun-23-2006
Patrick Louviot
Re: UT Immersion system ----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------

You can try www.metalscan.fr
Metalscan is a UT specialist since 1985.



 
05:51 Jun-23-2006

James Dolfi

Director
ford,
USA,
Joined Oct 1999
8
Re: UT Immersion system ----------- Start Original Message -----------
: : Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: : Thanks
: You can try www.metalscan.fr
: Metalscan is a UT specialist since 1985.
------------ End Original Message ------------


You can get more information at applied metrics.
They have made systems to check spot welds and material properties etc. Marv Fleming is the President of this company mail mmf@applied-metrics.com.

Hope this helps.



 
07:25 Jun-24-2006
K S Lakshmanan
Re: UT Immersion system Dear Sir,

We would like to inform that we are the authorized / exclusive Representative of Olympus NDT for their complete range of Products in India (Panametrics NDT (U.S.A.), R/D Tech (Canada), Staveley NDT (U.S.A.) are the business units of Olympus NDT).

We had supplied many ultrasonic immersion systems in INDIA.

We request you to please let us know your requirement in detail, full address, contact phone numbers to enable us to submit our Offer.

Best Regards

K.S.Lakshmanan,

General Manager

Testing Machines Department

Blue Star Limited

No. 46, Cathedral Road

Chennai - 600 086

Direct No. 0091 44 4244 4250

Mobile No. 99400 36849

Board No. 0091 44 4244 4000

Fax No. 0091 44 4244 4190 / 0091 44 28116736

----------- Start Original Message -----------
: Could anyone give me suggestion on which company has reliable ut immersion systems?anyone having experience with GE, Matech or other systems? Please guide
: Thanks
------------ End Original Message ------------




 
05:47 Jun-24-2006
David LAVASTRE
Re: UT Immersion system Hi Sunny,
Many manufacturers can provide UT systems qualified following GEAE specs.
With GEAE specifications, the UT systems (instrument+transducers) must be registered in a "Data For Ordering" file and you can use only transducers and instrument that are in DFOs.
Also, The "tank" must met with GEAE specs geometric requirements.
The manufacturers that are already qualified that I know are ;
Matec (USA)> http://www.matec.com/
IRT Scanmaster (Israel)> http://www.scanmaster-irt.com/
BIA (France > http://www.bia.fr/
GE Inspection Technologies (USA)>http://www.geinspectiontechnologies.com/index.html

For the instruments and transducers, and for conventional immersion UT, GEAE suppliers use ;
Harisonic transducers (now Olympus NDT) > http://www.olympusndt.com/
Megasonic IHM and TLC transducers.

I think that you can ask for DFOs to Mr Thadd Patton at thadd.patton@ae.ge.com

David



 
07:36 Nov-27-2006
Tristian
Addison Hello%2C+nice+site+look+


 


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|