where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1028 views
Technical Discussions
Sunny
Sunny
01:01 Jun-21-2006
UT and ET INDIA

What is the prospect of UT and ET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.

Thanks


    
 
 
Nigel Armstr
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1094

Nigel Armstr

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1094
05:16 Jun-22-2006
Re: UT and ET INDIA
----------- Start Original Message -----------
I would think very good, but of course the growth of NDT is closely associated with industrial growth in any country. I take it from your questions you are primarily involved with automated H/Ex tube inspection. Increasing fuel and chemical demands should bolster growth in this sector of NDT. If India kicks off a large commercial plane-building enterprise then the use of ET and UT systems will certainly grow very rapidly.


: What is the prospect of UT and ET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
: Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.
: Thanks
------------ End Original Message ------------




    
 
 
mandar vinze
Engineering, manufacturer
magnafield controls, India, Joined May 2006, 3

mandar vinze

Engineering, manufacturer
magnafield controls,
India,
Joined May 2006
3
05:26 Jun-24-2006
Re: UT and ET INDIA
---------- Start Original Message -----------
:Both UT and ET are very widely used in India,there is a large scale developent in the Indian power, space, nuclear sectors .Every year we organise a National Seminar on NDE in India in the month of December it would be a good idea if you can visit it as you can get a complete idea of NDT in India at one place, for more information visit www.nde2006.com .I can provide more specific info if required
: I would think very good, but of course the growth of NDT is closely associated with industrial growth in any country. I take it from your questions you are primarily involved with automated H/Ex tube inspection. Increasing fuel and chemical demands should bolster growth in this sector of NDT. If India kicks off a large commercial plane-building enterprise then the use of ET and UT systems will certainly grow very rapidly.
:
: : What is the prospect of UT and ET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
: : Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.
: : Thanks
------------ End Original Message ------------




    
 
 
N.Kuppusamy
Consultant, Level-III
United Testing Co. Pte Ltd, Singapore, Joined Jan 2003, 13

N.Kuppusamy

Consultant, Level-III
United Testing Co. Pte Ltd,
Singapore,
Joined Jan 2003
13
00:25 Jun-27-2006
Re: UT and ET INDIA
India uses all sort of NDT. UT is already used extesively in many Industries such as super thermal, hydro power plants, Oil & Petrochemical Industies, Aerospace, etc.

Use of ET is increased many fold (in the recent years)in Power and Petrochemical Sector.

Now, India is doing outstanding R&D work on all NDT at Indian Institute of Technology - Chennai.

In the near future, INDIA will be a global NDT Power in terms of Development (of new technologies), Application and Technical Manpower.


----------- Start Original Message -----------
: I would think very good, but of course the growth of NDT is closely associated with industrial growth in any country. I take it from your questions you are primarily involved with automated H/Ex tube inspection. Increasing fuel and chemical demands should bolster growth in this sector of NDT. If India kicks off a large commercial plane-building enterprise then the use of ET and UT systems will certainly grow very rapidly.
:
: : What is the prospect of UT andET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
: : Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.
: : Thanks
------------ End Original Message ------------




    
 
 
Jitender Yadav
Jitender Yadav
09:35 Jun-30-2006
Re: UT and ET INDIA
There are some companies involved in Eddy current and IRIS inspection of heat exchanger tubes in india, some of them that i know are PLEXTECH, BLUE STAR, TESTEX,... all of them are based in Mumbai.
PLEXTECH executes all the nuclear power contracts,
they are having machines like OMNI 100( Core-star),
Ferrouscope 308(Russelltech), INSIS(Technofour), Phasec D62(Hocking).
BLUE STAR is having MS5800(R/D TECH), concentrating on IRIS.
Not much knowledge about TESTEX because i didn't worked there.
----------- Start Original Message -----------
: India uses all sort of NDT. UT is already used extesively in many Industries such as super thermal, hydro power plants, Oil & Petrochemical Industies, Aerospace, etc.
: Use of ET is increased many fold (in the recent years)in Power and Petrochemical Sector.
: Now, India is doing outstanding R&D work on all NDT at Indian Institute of Technology - Chennai.
: In the near future, INDIA will be a global NDT Power in terms of Development (of newtechnologies), Application and Technical Manpower.
:
: : I would think very good, but of course the growth of NDT is closely associated with industrial growth in any country. I take it from your questions you are primarily involved with automated H/Ex tube inspection. Increasing fuel and chemical demands should bolster growth in this sector of NDT. If India kicks off a large commercial plane-building enterprise then the use of ET and UT systems will certainly grow very rapidly.
: :
: : : What is the prospect of UT and ET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
: : : Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.
: : : Thanks
------------ End Original Message ------------




    
 
 
D.Simon Amallraja
D.Simon Amallraja
09:20 Jul-01-2006
Re: UT and ET INDIA
----------- Start Original Message -----------
: There are some companies involved in Eddy current and IRIS inspection of heat exchanger tubes in india, some of them that i know are PLEXTECH, BLUE STAR, TESTEX,... all of them are based in Mumbai.
: PLEXTECH executes all the nuclear power contracts,
: they are having machines like OMNI 100( Core-star),
: Ferrouscope 308(Russelltech), INSIS(Technofour), Phasec D62(Hocking).
: BLUE STAR is having MS5800(R/D TECH), concentrating on IRIS.
: Not much knowledge about TESTEX because i didn't worked there.
: ----------- Start Original Message -----------
: : India uses all sort of NDT. UT is already used extesively in many Industries such as super thermal, hydro power plants, Oil & Petrochemical Industies, Aerospace, etc.
: : Use of ET is increased many fold (in the recent years)in Power and Petrochemical Sector.
: : Now, India is doing outstanding R&D work on all NDT at Indian Institute of Technology - Chennai.
: : In the near future, INDIA will be a global NDT Power in terms of Development (of new technologies), Application and Technical Manpower.
: :
: : : I would think very good, but of course the growth of NDT is closely associated with industrial growth in any country. I take it from your questions you are primarily involved with automated H/Ex tube inspection. Increasing fuel and chemical demands should bolster growth in this sector of NDT. If India kicks off a large commercial plane-building enterprise then the use of ET and UT systems will certainly grow very rapidly.
: : :
: : : : What is the prospect of UT and ET in India?. How much UT and ET is done in India? Do they do ET Tubing in Heat Exchangers in India?
: : : : Could anyone through light on this please. Since I am involved in these things here in US so I want to know what is the future of UT and ET in India.
: : : : Thanks
------------ End Original Message ------------

We, Mahindra Intertrade Ltd, are the Indian Reps from India for Zetec Product ranges including MS5800 series

Look into www.zetec.com and you will all info about this.

D.Simon Amallraja.


    
 
 
Jayapal
Jayapal
06:54 Jul-29-2006
Re: UT and ET INDIA
Why not? All refineries are going for Inspection of exchangers (Specially REAC). You can search for oil companies in India and contact them.



    
 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

NozzleScan: Radial nozzle scanner with probe skew

NozzleScan is a versatile manual scanning solution developed for the inspection of nozzle welds in
...
both set-through and set-on configurations. Available in both two-axis and three-axis instrument configurations and adaptable to cover a wide range of 90-degree nozzle sizes, from 3" upwards, on ferritic and austenitic materials.The transducer skew axis can also be adjusted, encoded and locked.
>

Exertus Dual 120

The Exertus Dual 120 Projector has the ability to accept Iridium 192 sources or Selenium 75 source
...
s. This projector incorporates design and safety features that make it flexible, compact and lightweight. The Projector is lighter than most of its competitors. It incorporates an improved source channel, based on a new helicoidal design, which makes maintenance easier. The helicoidal design also allows smoother movement of the source assembly inside the device, making it easier for the operator and improving safety. The Projector also has a unique safety feature not found in competitive products. The source assembly locking mechanism is triggered by the source holder capsule at the front of the source assembly, thereby always assuring the operator that the source has returned to the safe position. The Exertus Dual 120 is ISO3999:2004 compliant.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s