where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

LECOEUR ELECTRONIQUE
The Specialist of electronics for ultrasonic testing.
1 views
Technical Discussions
Pim van Andel
Pim van Andel
01:40 Feb-17-1998
Re: New method for detection CUI

: On Michael Twomery's article it is mentioned that originally it appeared in the Dec 1996 issue of the Inspectioneering Journal. It is possible that today other methods are available or undergoing investigations. In our ASNT '97 Fall conference report we reviewed the use of Ultrasonic Guided Waves for CUI [1].

: I anticipate that the new book [2] of an NTIAC's work will be a comprehensive state-of-the-art report on CUI.
: We will update this information also at our Publication department.

: Regards

: Rolf Diederichs


One aspect of the real time radiography described by Twomery is that
the imaged area is small (about one inch in diameter). This leads to a
large POD for large CUI defect and a low POD for pitting. Also
the scan pattern will affect POD. A choice for delagging or real time
X-ray would require some knowledge on POD. Has someone made a study
of this?

Pim van Andel.


 
 Reply 
 
John McMenemy
John McMenemy
06:33 Jan-22-1999
Re: New method for detection CUI
Does anyone have useful information with respect to using this equipment in line with pipe wall thickness surveys




 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window