where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GRANPECT COMPANY Ltd
GRANPECT, X-ray NDT Expert You Can Rely on

600 views
Technical Discussions
Sunny
Sunny
09:05 Sep-05-2006
UT Inspection of Tubing

Could some one suggest a company which can UT inspect .15'' OD x .01 " wall tubes possibly based near californea.


    
 
 
David Mackintosh
Engineering,
Acuren Group Inc., Canada, Joined Feb 2011, 85

David Mackintosh

Engineering,
Acuren Group Inc.,
Canada,
Joined Feb 2011
85
09:36 Sep-05-2006
Re: UT Inspection of Tubing
Acuren has a branch in Anaheim
www.canspec.com/rockwood/branch_california.htm

----------- Start Original Message -----------
: Could some one suggest a company which can UT inspect .15'' OD x .01 " wall tubes possibly based near californea.
------------ End Original Message ------------




    
 
 
Fred Beck
Fred Beck
04:06 Sep-06-2006
Re: UT Inspection of Tubing
----------- Start Original Message -----------
: Could some one suggest a company which can UT inspect .15'' OD x .01 " wall tubes possibly based near californea.
------------ End Original Message ------------

We are as far away from Califonia as you can get (New Jersey), but we can inspect tubing with that diameter and wall thickness.

If you get stuck, give us a call. 609-882-2894. www.tactictest.com.


    
 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Echomac® PA Rail Wheel Tester

MAC introduces two versions of Rail Wheel Testers using ECHOMAC® PA platform based on customer requ
...
irements.
>

Mentor UT – Ultrasonic Phased Array Flaw Detector

With Mentor UT, you get an accessible and efficient inspection experience. Create user-defined menus
...
and workflows (“apps”) with GE’s desktop software Mentor Create to ensure consistency, even for the most complex inspections, every time. Mentor UT is the first UT device to easily allow wireless connectivity and live streaming, so you get second opinions when you need them most—in real-time.
>

Digital Radiography for Concrete Inspection

In the construction industry (buildings, bridges) there is a need for fast non- destructive means,
...
most commonly to locate targets (Pipes, Re-bars, Conduit, Fittings etc.) within concrete structures prior to drilling, cutting or coring. Measuring reinforcements is also performed for static calculations and to detect corrosion problems and damages. Cracks and voids can also be visualized. The examinations are not only restricted to concrete constructions; they can also be applied to reinforced masonry made of natural stones or bricks.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window
s