where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.

357 views
Technical Discussions
RT. JEYAKUMAR
NDT Inspector
Singapore, Joined Aug 2002, 10

RT. JEYAKUMAR

NDT Inspector
Singapore,
Joined Aug 2002
10
01:43 Sep-06-2006
THIN COMPOSITE MATERIAL - UT

Hi Everyone,

Please kindly recommend me what kind of probe shall be suitable for aerospace honeycomb composite material lack of bond testing. Please suggest technique also.

Thank you very much

With regards,

RT. Jeyakumar


    
 
 Reply 
 
Simon Amallraja
Simon Amallraja
09:17 Sep-08-2006
Re: THIN COMPOSITE MATERIAL - UT
----------- Start Original Message -----------
: Hi Everyone,
: Please kindly recommend me what kind of probe shall be suitable for aerospace honeycomb composite material lack of bond testing. Please suggest technique also.
: Thank you very much
: With regards,
: RT. Jeyakumar
------------ End Original Message ------------

Non Contact UT will be more suitable for this applications.We, Mahindra Intertrade Ltd, are the Indian Agents for Ultran, USA, the Market Leaders for NCU Systems and Probes etc.,

Send me your complete reqt by mail and we will meet and discuss and give you solutions for your applications.

D.Simon Amallraja. 0091 98663 43309


    
 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Semi-Automated Phased Array Immersion System for Small Composite Parts

Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
...
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window