where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
407 views
Technical Discussions
S S Gupta
S S Gupta
03:56 Sep-28-2006
Acoustic Emission

I need performance reports of acoustic emission based inspection techniques in large (80 metre diamter) oil storage tanks with respect to corrosion probability in tank bottom plate etc.


 
 Reply 
 
Jens Forker
Jens Forker
07:45 Sep-28-2006
Re: Acoustic Emission
Hi Mr Gupta,

I will send to your email the synthesis report from an EC funded project regarding this topic. In the project a technology has been developed by which it is possible to differentiate between active surface corrosion and active corrosion under thick layer of corrosion products.

best regards

Jens Forker
Vallen-Systeme GmbH

----------- Start Original Message -----------
: I need performance reports of acoustic emission based inspection techniques in large (80 metre diamter) oil storage tanks with respect to corrosion probability in tank bottom plate etc.
------------ End Original Message ------------




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window