where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Teletest Focus+ was the first system to use long-range guided wave ultrasonic testing to detect corrosion in pipelines.

Technical Discussions
J Mauricio B Rabello
J Mauricio B Rabello
02:50 Oct-05-2006
Computed Radiography

Who has experience using CR for inspecting welds?

Christoph Schnitger
Christoph Schnitger
01:24 Oct-05-2006
Re: Computed Radiography
Hello Mauricio,

if you need help by selecting the right hardware for your application please drop me a line:

We have available:

- Selection of different CR-foils
- Selection of different CR-Scanners
- Software
- Selection of different screens
- exposure calculation
- training in working with....

Thanks Christoph

Director, NDT Consultant
Energy Workforce Group of Companies, Malaysia, Joined Aug 2003, 12


Director, NDT Consultant
Energy Workforce Group of Companies,
Joined Aug 2003
01:47 Oct-05-2006
Re: Computed Radiography
----------- Start Original Message -----------
: Who has experience using CR for inspecting welds?
------------ End Original Message ------------

Dear Mr.J Mauricio B Rabello,

Could you please provide me more details? We have been carrying out CR in Malaysia & SE quite extensively





Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window