where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Main Sponsors
Sponsors

NDT Webinar / On-Demand Webinar / Webcast / Video Tutorial / Voiceover Powerpoint ?

In time of COVID-19, where presentations on Internet platforms are more used than ever, we would like to point out that we can publish several kind of presentation formats at NDT.net. In the Forum and in particular the new board "Virtual Showroom" or the
...
traditional board "Technical Discussions" we can provide a webinar-like communication.
For speakers of canceled or postponed conferences we offer the opportunity to publish their presentation as a Voiceover Powerpoint in our monthly NDT.net Issue (and Open Access Archive). This is a good opportunity to present a presentation in time without further delay.
>

EWGAE 2020 - Canceled

The new date and venue regarding the next edition of European Conference on Acoustic Emission Testing will be provided by the EWGAE group.

M2 Electronics (Shanghai) Company Limited

A high-tech company, specializing in Phased Array Ultrasound Probes, TOFD probes, UT probes, medical probes and custom probes.

Ether NDE

A dedicated manufacturer, and developer, of Eddy Current (ECT) non-destructive testing (NDT) equipment, probes and accessories.

USA Borescopes

One stop source for all your visual inspection requirements. We offer borescopes, videoscopes, push cameras and pipe inspection cameras.

Verification of detachable and integrated wedges used with PA probes

IPLEX™ NX Working Channel Solution Features Six Internal Retrieval Tools to Expand the Videoscope’s Capabilities

Zetec to Host on-demand Webinar on Using Advanced Ultrasonic Technologies to Detect, Assess HTHA

Digital “Control Show” Sessions with Waygate Technologies

Control 2020 - Visit Eddyfi's Virtual Booth

New nanofocus X-ray tubes from X-RAY WorX - Target cooling now available for highest resolution tubes with 225 kV and 240 kV

Significant Increase in Performance – Frame Rate Exceeds 100 kHz Limit

Integrated sensors secure and monitor the manufacture of thick-walled CFRP structures

Meet the latest in ultrasonic probes

CR 35 NDT Makes Offshore Inspection Easy

Testia has the right Tool for Remote Assistance

AT Automation Technology Promotes Athinodoros Klipfel to Head of Sales

ZfP-Zeitung April-Ausgabe 168

Product Spotlight

On Demand Webinar: Using Eddy Current Array for Large Areas in Place of Magnetic Particle and Liquid Penetrant Testing

New on-demand webinar on the use of eddy current array (ECA) technology in lieu of liquid penetrant
...
testing (PT) and magnetic particle testing (MT) for large area screenings. The webinar includes an introduction to the technologies with advantages and disadvantages of each. Side by side examples are discussed including aircraft stringers, engine blades, forgings, weld plates & more. View it today.
>

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

MANTIS

MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
...
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

82 Exhibitors >

• 7 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi Technologies-EKOSCAN-Elcometer NDTEther NDE-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-Guided Ultrasonics Ltd.-Hillger NDT GmbH-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-KARL DEUTSCH-LECOEUR ELECTRONIQUEM2 Electronics (Shanghai) Company Limited-Magnetic Analysis Corporation-MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-Modsonic Instruments Mfg Co Pvt Ltd-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR -NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems LimitedProceq SASanying Precision Instruments Co.,Ltd-ScanMaster Systems (IRT) Ltd.-SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC GmbH-Sonotron NDT-Technology Design Ltd-TecScan Systems-Teledyne ICM-Telops-TESTIA-TraiNDE by EXTENDETrueflawULSO TECH CO., LTD.-ULTRASOUND INSTITUTEUSA Borescopes-Vallen-Systeme GmbH-Varex Imaging-VOGT Ultrasonics GmbH-Volume Graphics GmbH-Waygate Technologies-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window