where expertise comes together
- since 1996 -
- since 1996 -
an innovative, forward thinking and fast moving non-destructive testing (NDT) technology company who specialise in the design ...
38-Link™ Adaptor Makes Inspections More Efficient by Enabling Wireless Thickness Data Transfer from Any 38DL PLUS® Gage
Cutting the Cord: A Simple Solution for Wireless Thickness Gage Data Transfer
3D Modeling Expands the Measuring Power of the Olympus IPLEX® NX Videoscope
New Olympus DSX1000 Digital Microscope Offers Advanced Tools for Faster Failure Analysis
Imaging Technology Symposium at the Museum of Natural History Berlin Exceeded All Expectations
Quality Control of 3D Printed Parts - Seminar at the Fraunhofer Institute in Dresden
Smart Infrared Cameras from AT – Automation Technology among the Finalists at the inspect award 2020
The new Smart UE1: TESTIA’s all-in-one promise for faster and easier Aircraft inspections
Fraunhofer IZFP at GIFA 2019: Robot-assisted sensor system for the quality monitoring of hybrid parts and components
APG-DISC- Pocket Guide for Visual Examination of Welds – Discontinuity Causes and Remedies
Non-Destructive Testing and Condition Monitoring Techniques for Renewable Energy Industrial Assets (1st Edition)
Aaron Craft Honored with ASTM International James A. Thomas President’s Leadership Award
Obituary: Magnetic Analysis Corp’s Long-Time President and Chairman William Gould
The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
PROlineTOP Plug & Play Ultrasonic inspection device
As Plug & Play solution it units all control and operation elements in a small housing and therefo
re replaces the typical control cabinet...
Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures
An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
High-performance Linear Phased Array Probes
Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
YXLON Cougar EVO
Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
nication, the NEOS III is perfect for users that want to quickly assess an item.
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
Recently posted ...
90 Exhibitors >
• 4 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi-Eddyfi Technologies-Eddyfi Technologies / M2M-EKOSCAN-Elcometer NDT-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-GE Inspection Technologies-GRANPECT COMPANY Ltd-Guided Ultrasonics Ltd.•Hi-Spec Systems-Hillger Ing. Büro-I&T Nardoni Institute -IDEKO S.Coop-IMASONIC SAS-IMechE Engineering Training Solutions-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-JIREH Industries-KARL DEUTSCH-LECOEUR ELECTRONIQUE-Logos Imaging-Magnetic Analysis Corporation•MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR •NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited-PRAGMA-ScanMaster Systems (IRT) Ltd.-Silverwing -SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC Ultraschallsensorik Halle GmbH-Sonotron NDT-TD NDE-Technology Design Ltd-TecScan Systems-Teledyne ICM-Teletest•Telops-TESTIA-The Validation Centre (TVC) Ltd-TSC-TWI-Ultrasonic Sciences Ltd-ULTRASOUND INSTITUTE-Vallen-Systeme GmbH-Varex Imaging-VisiConsult Systems & Solutions GmbH-VOGT Ultrasonics GmbH-Volume Graphics GmbH-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD