where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Main Sponsors
Sponsors

Pipeline Dent Strain Assessment Using ASME B31.8

Overview, guidance, and theory on the use of ASME B31.8 to estimate strain in pipeline dents, by David Mackintosh, Acuren Inc.

Detection and sizing of internal vertical and quasi-vertical planar defects

The AxSEAM Scanner Simplifies Longitudinal Seam Weld Inspection

Inspecting Long Seam Welds Efficiently and Easily Using the AxSEAM™ Scanner

Phoenix ISL Development for Automated Train Hollow Axle Inspection

PAUT Solution for Austenitic Welds

ET and UT Testing Benches For Umbilical Laser Welded Tubes

DIU NDT Master Course 2020 – Late Intake and Online Participation Options

12th Internat. Symp. on NDT in Aerospace – Latest Updates

Phoenix ISL Offer Online UT Product Demonstrations

EXTENDE Newsletter - July 2020

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

On Demand Webinar: Improve the Efficiency and Accuracy of Inspection Scanning

On-demand webinar on scanning technology that helps improve the efficiency and accuracy of ultrasoni
...
c inspections in oil and gas, aerospace, manufacturing and other industrial applications. The webinar features a scanning solution for multiple inspection environments, including flat and curved specimens, magnetic and nonmagnetic surfaces and raster scanning over long distances. View it today.
>

GUL Subsea Solutions - Screeening & Monitoring

To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
...
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

81 Exhibitors >

• 7 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi Technologies-EKOSCAN-Elcometer NDTEther NDE-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-Guided Ultrasonics Ltd.-Hillger NDT GmbH-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-KARL DEUTSCH-LECOEUR ELECTRONIQUEM2 Electronics (Shanghai) Company Limited-Magnetic Analysis Corporation-MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-Modsonic Instruments Mfg Co Pvt Ltd-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR -NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems LimitedProceq SASanying Precision Instruments Co.,Ltd-ScanMaster Systems (IRT) Ltd.-SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC GmbH-Sonotron NDT-Technology Design Ltd-TecScan Systems-Teledyne ICM-Telops-TESTIA-TraiNDE by EXTENDETrueflawULSO TECH CO., LTD.-ULTRASOUND INSTITUTEUSA Borescopes-Vallen-Systeme GmbH-Varex Imaging-VOGT Ultrasonics GmbH-Volume Graphics GmbH-Waygate Technologies-WesDyne International (AMDATA Products)-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window