where expertise comes together
- since 1996 -
- since 1996 -
Pipeline Dent Strain Assessment Using ASME B31.8
Overview, guidance, and theory on the use of ASME B31.8 to estimate strain in pipeline dents, by David Mackintosh, Acuren Inc.
The AxSEAM Scanner Simplifies Longitudinal Seam Weld Inspection
Inspecting Long Seam Welds Efficiently and Easily Using the AxSEAM™ Scanner
DIU NDT Master Course 2020 – Late Intake and Online Participation Options
OmniScan™ X3 flaw detector
The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
MANTIS is a compact, powerful and affordable flaw detector (16:64PR), dedicated to field operators
. This portable equipment offers standard (electronic-, sector-, compound scan, conventional UT for pulse-echo, dual array and TOFD inspections), and advanced phased-array (real-time TFM -Total Focusing Method). MANTIS benefits from the same intuitive and user-friendly interface (CAPTURE) than Gekko for easier inspections.
NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
GUL Subsea Solutions - Screeening & Monitoring
To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
Ultrasonic Squirter/Gantry System
TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
Combination of Digital Image Correlation and Thermographic Measurements
The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
Research and Application Development For NDT
Acuren’s Research and Application Development specializes in the development of advanced ultraso
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection
This set of two blocks has been specially designed for situations where ultrasonic examination tak
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
VeeScan AirCraft Wheel Inspection
The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
Recently posted ...
4. PAUT Focal Depth for Weld Inspection5. Difference between “stage of test” and “p...6. On-Demand Webinar: More Efficient and Accurate ...
13. NDT Inspector for VT Method 14. NDT Inspector for UT method 15. work from home aut, tofd, paut 3rd party interp...
81 Exhibitors >
• 7 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi Technologies-EKOSCAN-Elcometer NDT•Ether NDE-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-Guided Ultrasonics Ltd.-Hillger NDT GmbH-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-KARL DEUTSCH-LECOEUR ELECTRONIQUE•M2 Electronics (Shanghai) Company Limited-Magnetic Analysis Corporation-MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-Modsonic Instruments Mfg Co Pvt Ltd-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR -NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited•Proceq SA•Sanying Precision Instruments Co.,Ltd-ScanMaster Systems (IRT) Ltd.-SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC GmbH-Sonotron NDT-Technology Design Ltd-TecScan Systems-Teledyne ICM-Telops-TESTIA-TraiNDE by EXTENDE•Trueflaw•ULSO TECH CO., LTD.-ULTRASOUND INSTITUTE•USA Borescopes-Vallen-Systeme GmbH-Varex Imaging-VOGT Ultrasonics GmbH-Volume Graphics GmbH-Waygate Technologies-WesDyne International (AMDATA Products)-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD