where expertise comes together
- since 1996 -
- since 1996 -
SHM-NDT 2020 - Abstracts due 15. Jan
International Symposium on Structural Health Monitoring and Nondestructive Testing, May 14-15, Québec City
TraiNDE by EXTENDE
TraiNDE will enhance your NDT teaching thanks to virtual educational tools.
Olympus Launches Next-Generation XRD with New SwiftMin® Software for Real-Time Onboard Quantitative Mineralogy and Phase Analysis
Webinar: Reliable and Confident Assessment of Corrosion and PittingsEinem Freund empfehlen
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
OmniScan™ X3 flaw detector
The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
PROlineTOP Plug & Play Ultrasonic inspection device
As Plug & Play solution it units all control and operation elements in a small housing and therefo
re replaces the typical control cabinet...
GUL QSR1® Scanning
How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
e Quantitative Short Range Scanning.
Ultrasonic Squirter/Gantry System
TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
Combination of Digital Image Correlation and Thermographic Measurements
The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge
The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
SONOAIR - air-coupled Phased Array Ultrasonic Inspection System
For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
Recently posted ...
4. Selection holes of SDH references blocks for a ...5. ASNT NDT LEVEL 2 UT, RT, MT, PT6. Long Term-NDT LEVEL-III
7. PCN/CSWIP Level II PAUT and TOFD Inspector (Exp...8. NDT information required / Canada9. NDT & QA&QC TRAINER/TUTOR
88 Exhibitors >
• 3 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi-Eddyfi Technologies-Eddyfi Technologies / M2M-EKOSCAN-Elcometer NDT-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-GE Inspection Technologies-GRANPECT COMPANY Ltd-Guided Ultrasonics Ltd.-Hi-Spec Systems-Hillger Ing. Büro-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-JIREH Industries-KARL DEUTSCH-LECOEUR ELECTRONIQUE-Logos Imaging-Magnetic Analysis Corporation•MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR •NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited-PRAGMA-ScanMaster Systems (IRT) Ltd.-Silverwing -SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC Ultraschallsensorik Halle GmbH-Sonotron NDT-TD NDE-Technology Design Ltd-TecScan Systems-Teledyne ICM-Teletest-Telops-TESTIA•TraiNDE by EXTENDE-TSC-TWI-Ultrasonic Sciences Ltd-ULTRASOUND INSTITUTE-Vallen-Systeme GmbH-Varex Imaging-VisiConsult Systems & Solutions GmbH-VOGT Ultrasonics GmbH-Volume Graphics GmbH-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD