where expertise comes together
- since 1996 -
- since 1996 -
Pipeline Dent Strain Assessment Using ASME B31.8
Overview, guidance, and theory on the use of ASME B31.8 to estimate strain in pipeline dents, by David Mackintosh, Acuren Inc.
The AxSEAM Scanner Simplifies Longitudinal Seam Weld Inspection
Inspecting Long Seam Welds Efficiently and Easily Using the AxSEAM™ Scanner
DIU NDT Master Course 2020 – Late Intake and Online Participation Options
OmniScan™ X3 flaw detector
The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
High-performance Linear Phased Array Probes
Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
AIS229 - Multipurpose Real Time System
Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
GUL Subsea Solutions - Screeening & Monitoring
To inspect new and existing subsea lines, you need proven technology and experience. GUL offers it's
technology to solve this challenge: GUL Subsea and gMAT Transducer Rings.
Echomac® PA Tube Weld Tester
The new robotic Echomac® PA TW is an operator friendly test system for detecting weld zone defects
in tube and pipe caused by scarfing or welding processes. Electronic scanning ensures that the entire weld zone is covered without the need for mechanical movement or operator adjustment.
Ultrasonic Probe Recharacterization Service
NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact email@example.com
Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
IntraPhase Athena Phased Array System
The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
Recently posted ...
1. COVID-19: NDT.net launches Virtual Showroom2. High Temp Application of White Contrast Paint f...3. For Sale: Omni MX2 16:128
4. PCN PAUT and TOFD technician5. UDF/UTT/HTUT/PAUT/TOFD/MT/PT/HT/HOLIDAY TEST/FT...6. PAUT corrosion mapping
10. On-Demand Webinar: More Efficient and Accurate ...11. Trainee For NDT 12. Stronger focus on customized probes
81 Exhibitors >
• 7 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi Technologies-EKOSCAN-Elcometer NDT•Ether NDE-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-Guided Ultrasonics Ltd.-Hillger NDT GmbH-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-KARL DEUTSCH-LECOEUR ELECTRONIQUE•M2 Electronics (Shanghai) Company Limited-Magnetic Analysis Corporation-MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-Modsonic Instruments Mfg Co Pvt Ltd-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR -NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited•Proceq SA•Sanying Precision Instruments Co.,Ltd-ScanMaster Systems (IRT) Ltd.-SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC GmbH-Sonotron NDT-Technology Design Ltd-TecScan Systems-Teledyne ICM-Telops-TESTIA-TraiNDE by EXTENDE•Trueflaw•ULSO TECH CO., LTD.-ULTRASOUND INSTITUTE•USA Borescopes-Vallen-Systeme GmbH-Varex Imaging-VOGT Ultrasonics GmbH-Volume Graphics GmbH-Waygate Technologies-WesDyne International (AMDATA Products)-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD