where expertise comes together
- since 1996 -
- since 1996 -
Call for Papers: 11th International Symposium on NDT in Aerospace 2019
Nov 13-15, Paris-Saclay, France
Call for Papers: 3rd Singapore International NDT Conference & Exhibition, SINCE 2019
Dec 4-5, Singapore
PAUT: Corrosion detection/survey under shell/tank bottom repairs using lap-welded patch plates
World First: Modular Configurable High-Speed 3D Compact Sensors – Tailor-Made Application Solutions at No Extra Cost
Magnetic Analysis Corp. Introduces 25mm Ultrasonic Rotary to Test Small Diameter Bar
Teledyne releases its proven high-resolution industrial x-ray detector at NDTMA’s Annual Conference
Zetec Announces RevospECT HX Pro Automated Data Analysis Software for Heat Exchanger Inspections
Olympus Launches New Industrial Research Chair at Quebec Engineering School
Conference on Industrial Computed Tomography (iCT) Distributing the Proceedings to Attendees Online
Non Destructive Testers (NDT) Equipment Market: Global Industry Analysis 2013 - 2017 and Opportunity Assessment; 2018 - 2028
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
PROlineTOP Plug & Play Ultrasonic inspection device
As Plug & Play solution it units all control and operation elements in a small housing and therefo
re replaces the typical control cabinet...
SONOAIR - air-coupled Phased Array Ultrasonic Inspection System
For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
Ultrasonic tomograph for imaging of concrete structures А1040 MIRA
Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
MUSE Mobile Ultrasonic Equipment
The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
Semi-Automated Phased Array Immersion System for Small Composite Parts
Turn-key semi-automated system as an improved and affordable solution for inspection of small comp
osite parts. Includes support table, immersion tank, scanner, PA instrument, PC, Analysis software, database, wedge management and other options.
Recently posted ...
1. ASNT NDT Level III in RT/UT/PT/MT & Metallurgis...2. Long Term-ANDT Technicians3. RT of objects of high thickness
10. RT,QA/QC11. Iraq-Long Term: Multiple Requirements III12. Iraq-Long Term: Multiple Requirements II
16. Isonic 3505 experience?17. Large diameter thick wall tube Immersion Ultras...18. ASNT LEVEL 2 -PT, MT, UT, VT, RT
95 Exhibitors >
• 2 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-Applus RTD-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd •DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi-Eddyfi Technologies-Eddyfi Technologies / M2M-EKOSCAN-Elcometer NDT-EXTENDE-FI Test- und Messtechnik GmbH-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-GE Inspection Technologies GmbH-GRANPECT COMPANY Ltd-Guided Ultrasonics Ltd.-Hillger Ing. Büro-I&T Nardoni Institute -IDEKO S.Coop-IMASONIC SAS-IMechE Engineering Training Solutions-IMG ULTRASUONI SRL-InfraTec GmbH-Innerspec Technologies-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-JIREH Industries-KARL DEUTSCH-LECOEUR ELECTRONIQUE-Logos Imaging-Magnetic Analysis Corporation-Matec Instrument Companies, Inc.-Materials Research Institute-MFE Enterprises, Inc-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-Nikon Metrology-NOVO DR -NT - Nove technologie s.r.o.-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited-PRAGMA-ScanMaster Systems (IRT) Ltd.-Silverwing -SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC Ultraschallsensorik Halle GmbH-Sonotron NDT-TD NDE-Technology Design Ltd-TecScan Systems-Teledyne ICM-Teletest-TESTIA•The Engineers EDGE Institute of NDT-The Validation Centre (TVC) Ltd-Thermo Fisher Scientific-TSC-TWI-Ultrasonic Sciences Ltd-ULTRASOUND INSTITUTE-Vallen-Systeme GmbH-Varex Imaging-Vidisco Ltd.-VisiConsult Systems & Solutions GmbH-VOGT Ultrasonics GmbH-Volume Graphics GmbH-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD