where expertise comes together
- since 1996 -
- since 1996 -
36 Articles22nd International Workshop on Electromagnetic Nondestructive Evaluation (ENDE 2017), France, September 6–8, 2017. Ebook: Electromagnetic Non-Destructive Evaluation (XXI)
Call for Papers: 10th International Workshop NDT in Progress 2019
Oct 7-9, Prague, Czech Republic
The (Sono)pen Is Mightier: 3 Tips to Improve Your Measurements
PAUT: In-Service Corrosion Survey of Critical Zone in the Annular Rings in the Above Ground Storage Tanks
Millimeter wave technology system for measuring the diameter, ovality, wall thickness, and sagging of large plastic pipes
PROlineTOP Plug & Play Ultrasonic inspection device
As Plug & Play solution it units all control and operation elements in a small housing and therefo
re replaces the typical control cabinet...
The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
Navic - Steerable Modular Automated Scanner
The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
TVC awarded UKAS accreditation
TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
Research and Applications Development For NDT
The Research and Applications Development (RAD) group is a newly formed team within Acuren dedicat
ed to tackling challenging inspection problems. Our focus is the development of novel, field deployable, advanced inspection techniques for use in cases where standard NDT methods are ineffective. We don't wait for new innovations, we engineer them. From concept to commissioning.
CIVA 2017 UT Module
CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
IntraPhase Athena Phased Array System
The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
ISAFE3 Intrinsically Safe Sensor System
ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
Webinar: FMC & Advanced Focusing Techniques for Improved Ultrasonic Inspections
Phased array ultrasound is now a commonly accepted inspection technology. Now there is excitement ar
ound new techniques in Phased Array: Full Matrix Capture (FMC) & Total Focusing Method (TFM). Our webinar on December 5 & 6 will illustrate how these techniques, implemented on a TOPAZ64 instrument, can improve the results of existing inspections. Register today.
Recently posted ...
1. Looking for inspection Job2. the practice guide of flawed specimen for NDT p...3. Establishing a Certification for EMAT Ultrasoni...
7. PAUT TOMOVIEW INDICATION8. ASME SEC.III NB NB-5243 Corner-Welded Nozzles9. NDT Level 2 Fresher / 1-2 years Experience
10. Frequency and Time Domain Data Analysis Approac...11. Require PCN/CSWIP AUT inspector12. Require ISO9712/PCN ACFM/ECT/IRIS/PECT/LRUT ins...
94 Exhibitors >
• 3 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-Applus RTD-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd •DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi-Eddyfi Technologies-Eddyfi Technologies / M2M-EKOSCAN-EXTENDE-FI Test- und Messtechnik GmbH-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-GE Inspection Technologies GmbH-GRANPECT COMPANY Ltd-Guided Ultrasonics Ltd.-Hillger Ing. Büro-I&T Nardoni Institute -IDEKO S.Coop-IMASONIC SAS•IMechE Engineering Training Solutions-IMG ULTRASUONI SRL-InfraTec GmbH-Innerspec Technologies-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-JIREH Industries-KARL DEUTSCH-LECOEUR ELECTRONIQUE-Logos Imaging-Magnetic Analysis Corporation-Mammon Technologies LLP-Matec Instrument Companies, Inc.-Materials Research Institute-MFE Enterprises, Inc-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-Nikon Metrology-NOVO DR -NT - Nove technologie s.r.o.-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited-PRAGMA-ScanMaster Systems (IRT) Ltd.-Silverwing -SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC Ultraschallsensorik Halle GmbH-Sonotron NDT-TD NDE-Technology Design Ltd-TecScan Systems-Teledyne ICM-Teletest-TESTIA-The Validation Centre (TVC) Ltd-Thermo Fisher Scientific-TSC-TWI-Ultrasonic Sciences Ltd-ULTRASOUND INSTITUTE-Vallen-Systeme GmbH-Varex Imaging-Vidisco Ltd.•VisiConsult Systems & Solutions GmbH-VOGT Ultrasonics GmbH-Volume Graphics GmbH-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD