where expertise comes together
- since 1996 -
- since 1996 -
an innovative, forward thinking and fast moving non-destructive testing (NDT) technology company who specialise in the design ...
38-Link™ Adaptor Makes Inspections More Efficient by Enabling Wireless Thickness Data Transfer from Any 38DL PLUS® Gage
Cutting the Cord: A Simple Solution for Wireless Thickness Gage Data Transfer
3D Modeling Expands the Measuring Power of the Olympus IPLEX® NX Videoscope
New Olympus DSX1000 Digital Microscope Offers Advanced Tools for Faster Failure Analysis
Imaging Technology Symposium at the Museum of Natural History Berlin Exceeded All Expectations
Quality Control of 3D Printed Parts - Seminar at the Fraunhofer Institute in Dresden
Smart Infrared Cameras from AT – Automation Technology among the Finalists at the inspect award 2020
The new Smart UE1: TESTIA’s all-in-one promise for faster and easier Aircraft inspections
Fraunhofer IZFP at GIFA 2019: Robot-assisted sensor system for the quality monitoring of hybrid parts and components
APG-DISC- Pocket Guide for Visual Examination of Welds – Discontinuity Causes and Remedies
Non-Destructive Testing and Condition Monitoring Techniques for Renewable Energy Industrial Assets (1st Edition)
Aaron Craft Honored with ASTM International James A. Thomas President’s Leadership Award
Obituary: Magnetic Analysis Corp’s Long-Time President and Chairman William Gould
PROlineTOP Plug & Play Ultrasonic inspection device
As Plug & Play solution it units all control and operation elements in a small housing and therefo
re replaces the typical control cabinet...
Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features
TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2
SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
nication, the NEOS III is perfect for users that want to quickly assess an item.
FAAST-PA! OEM Patented phased Array for high speed UT inspection
Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
TVC awarded UKAS accreditation
TVC are delighted to finally announce we have been awarded UKAS accreditation for our calibration
laboratory. Laboratory accreditation to ISO/IEC 17025:2005 enables us to conduct the Electrical Verification of Ultrasonic Flaw Detection Equipment to BS EN 12668-1:2010. It has taken many months of hard work and we want to thank our staff for all their efforts during this massive undertaking.
SONOAIR - air-coupled Phased Array Ultrasonic Inspection System
For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
Recently posted ...
10. dpt possibility11. Message from Mr.Kasi in whattsup group regardin...12. EXPERIENCED UT TECHNICIAN
13. Indutronics, inc14. "WELDING INSPECTOR - PIPING"15. ASNT NDT Level-III/AUT OPERATOR/NDT SUPERVISOR/...
16. NACE Level 3 Candidates with Oil & Gas Experien...17. Civil QC Inspector Min 10 years exp in OIL & GA...18. NDT assistant /freshers
90 Exhibitors >
• 4 New Exhibitors -Acoustic Emission Consulting, Inc.-ACS-Solutions GmbH-Advanced OEM Solutions -Airstar Inc.-AT-Automation Technology GmbH-BALTEAU NDT-Canadian Institute for NDE-Controle Mesure Systemes-Cygnus Instruments Ltd-Dandong Aolong Radiative Instrument Gruop Co., Ltd.-Dantec Dynamics GmbH -DASEL SISTEMAS-Doppler Electronic Technologies Co., Ltd -DÜRR NDT GmbH & Co. KG-ECLIPSE SCIENTIFIC -Eddyfi-Eddyfi Technologies-Eddyfi Technologies / M2M-EKOSCAN-Elcometer NDT-EXTENDE-FORCE Technology-Gammatec NDT Supplies SOC Ltd-GB Inspection Systems Ltd.-GE Inspection Technologies-GRANPECT COMPANY Ltd-Guided Ultrasonics Ltd.•Hi-Spec Systems-Hillger Ing. Büro-I&T Nardoni Institute -IDEKO S.Coop-IMASONIC SAS-IMechE Engineering Training Solutions-IMG ULTRASUONI SRL-InfraTec GmbH-Innovation Polymers-INTRON PLUS Ltd.-Iris Inspection Services, Inc.-JIREH Industries-KARL DEUTSCH-LECOEUR ELECTRONIQUE-Logos Imaging-Magnetic Analysis Corporation•MASHPROJECT LLC-Matec Instrument Companies, Inc.-Materials Research Institute-NDT Master-NDT Systems, Inc.-NDT.net-NDTSS - Non Destructive Testing Society of Singapore-NOVO DR •NOVOTEST Ltd-OKOndt GROUP-Olympus Scientific Solutions Americas-PACSESS NDT / Larivière GmbH-PBP Optel sp. z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems Limited-PRAGMA-ScanMaster Systems (IRT) Ltd.-Silverwing -SIUI (Shantou Institute of Ultrasonic Instruments Co.,Ltd)-Socomate International-Sonatest Ltd-SONOTEC Ultraschallsensorik Halle GmbH-Sonotron NDT-TD NDE-Technology Design Ltd-TecScan Systems-Teledyne ICM-Teletest•Telops-TESTIA-The Validation Centre (TVC) Ltd-TSC-TWI-Ultrasonic Sciences Ltd-ULTRASOUND INSTITUTE-Vallen-Systeme GmbH-Varex Imaging-VisiConsult Systems & Solutions GmbH-VOGT Ultrasonics GmbH-Volume Graphics GmbH-WesDyne International (AMDATA Products)-X-RAY WorX GmbH-YXLON Copenhagen-YXLON International GmbH-Zawada NDT-ZETEC, Inc.-ZHONG YI NDT CO., LTD