where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Sonatest Ltd
From our three distinct business centres in the UK, USA and CANADA, Sonatest design and produce a leading range of high performance ultrasonic NDT equipment and accessories.
ProfileColleagues Albums -2/3BlogNews
Marius Stephen Purcell

-Posted 10 Forum Messages here
... is Male, is single, has 1 child, is born 17 December 1990

-Posted 10 Forum Messages here
... is Male, is single, has 1 child, is born 17 December 1990

Send Email
(you must login)

(you must login)

Address:PdP Kruger Str. Private Bag X1000, 2302
Country:South Africa
Email Address:
Institution:Sasol (Pty) Ltd.

Languages:English, Afrikaans
Education Degrees:In Progress - BSc (Hons) Nondestructive Testing
Work in or as:Engineering,
Main Method or Other:NDT Wide, ET, RT, UT, Other Methods, Phased Array, ToFD, Full Matrix Capture, Computed Radiography, Digital Radiography
Certifications:ISO 9712 NDT Level III
NDT Suppliers:GammaTec, Eddyfi, Olympus, Zetec, M2M, Creaform3D, Silverwing, Jireh, Sonatest, Sonospetion
NDT Equipments:Gekko, Topaz64, Ectane 2, Eddyfi Lyft, MX5800, HandyScan 3D

Technique development for the inspection of Duplex Stainless Steel corner-joint geometries using FMC and the Total Focusing Method on the principle of azimuth angle steering
 Development of acceptance criteria and assessment of results for composite material inspection of HDPE using TOFD
 Low frequency Phased Array inspection for the detection of ID connected SCC damage within Austenitic material; measuring through thickness dimensions of 1.5 mm
 TFM corrosion mapping at ambient and elevated temperatures of 280°C
 PAUT of weld seams at elevated skin temperatures of up to 390°C on high energy steam piping
 Ultrasonic shear wave inspection of components, 3” tubes and pipes, measuring 3 mm in thickness
Established PAUT and ACFM programme for the inspection of gears and rotary blades Graphitization nodule detection on high energy steam piping weld seams using PAUT
Critical flaw sizing using TFM post processing
Ultrasonic inspection using SH-wave modes for the testing of curved components exhibiting corrosion at/under pipe supports.

Science and Medical Journals and Publications – Physics, Behavioral Science and Psychology
Writing – Novels and Short Stories
Art house filming

Profile created 2018-Jul-20, updated 2019-Aug-18, Login to Edit

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window