where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Archive Authors Keywords


Publication Index



Select filters or/and search


Sort Pages
Check Filters!
Recenty New/Updated
NDT.net Journal
DGZfP Rail-2020
NDT Review
iCT 2020
PANNDT 2019
SINCE 2019
NDT Days 2019
AeroNDT 2019
more >
Recently New/UpdatedNDT.net JournalDGZfP Rail-2020NDT ReviewiCT 2020PANNDT 2019SINCE 2019NDT Days 2019AeroNDT 2019 more >

ECNDT 2018

12th European Conference on Non-Destructive Testing (ECNDT 2018), Gothenburg 2018, June 11-15

Share ...     

Keywords Authors & Institutions
Search Results: 349 in Date '2018-08-01'
Title / Author(s) / Keywords Session
Academia European Reserch Day
NDT Integrity Engineering
P. Trampus17, V. Krstelj11
Academia NDT International, Brescia, Italy
Education, Fracture mechanics, Strength

Academia European Reserch Day
Academia European Reserch Day
Current Developments in Digital Radiography and Computed Tomography from nm to macro scale
U. Ewert213
8.3 Radiation Methods; BAM Federal Institute for Materials Research and Testing1327, Berlin, Germany
Defects, Radiography, Tomography

Academia European Reserch Day
Academia European Reserch Day
Crack detection on aerospace composites by means of photorefractive interferometry.
T. Seresini1, S. Sunetchiieva15, H. Pfeiffer128, M. Wevers154, J. Xiong22, C. Glorieux15
1aDepartment of Physics and Astronomy, Laboratory for Soft matter and Biophysics bDepartment of Materials Engineering (MTM) cDepartment of Materials Engineering(MTM); Catholic University of Leuven (KU Leuven) 105, Leuven, Belgium
2Research Institute of Nano-Resolution Optics (RINRO); Nanjing University of Science and Technology4, Nanjing, China
Aerospace, Novel Techniques, Surface waves, Technology Transfer in NDT, Ultrasonics

Academia European Reserch Day
Academia European Reserch Day
Non-destructive evaluation of dissimilar material joints
D. Smagulova2, E. Jasiuniene28
aLaboratory of Acoustics and Thermal Physics bUltrasound Institute; Ultrasound Institute at Kaunas University of Technology189, Kaunas, Lithuania
Adhesives and Bonding, Composite materials, Phased arrays, Ultrasonics

Academia European Reserch Day
Academia European Reserch Day
New technologies for air-coupled ultrasonic transducers
M. Gaal43, D. Kotschate15
Akustische und Elektromagnetische Verfahren,Ultraschallsonderprüftechniken; BAM Federal Institute for Materials Research and Testing1327, Berlin, Germany
Air-coupled ultrasound, Transducers, Ultrasonics

Academia European Reserch Day
Academia European Reserch Day
NDT 4.0 - Overall Significance and Implications to NDT
R. Link19, N. Riess214
1Consultancy Dr. Rainer Link9, Kerpen, Germany
2Helling GMBH14, Heidgraben, Germany
Technology Transfer in NDT, Image processing

Academia European Reserch Day
Academia European Reserch Day
Nonlinear Signal Processing for NDT 4.0
S. Dos Santos125, Z. Převorovský265, C. Mattei32, V. Vengrinovich423, G. Nardoni534, J. Wrights6
1INSA Centre Val de Loire, Blois campus, University of Tours27, Blois, France
2Institute of Thermomechanics, NDT Laboratory; Czech Academy of Sciences (CAS)113, Prague, Czech Republic
3Creo Dynamics AB2, Linköping, Sweden
4Institute of Applied Physics (IAPH); National Academy of Sciences (NAS) of Belarus104, Minsk, Belarus
5I&T Nardoni Institute35, Brescia, Italy
6Theta Technologies, Exeter, United Kingdom
NDT-wide, Ultrasonic Testing (UT), signal processing, image processing, research, TR-NEWS, Ultrasonics, Standards, Novel Techniques, Technology Transfer in NDT, NDT 4.0

Academia European Reserch Day
Acoustic Emission
A music-inspired approach to structural health monitoring
J. Pimentel4, R. Klemm4, A. Irretier4, M. Dalgic4, H. Zoch4, K. Krieger4
aInstitute of Electrodynamics and Microelectronics (ITEM) bInstitute for Materials Testing, MPA; University of Bremen14, Bremen, Germany
Acoustic Emission (AE), condition monitoring, data processing, Metals, Sensors, Acoustic emission, Percussive separation

Acoustic Emission
Acoustic Emission
Acoustic Emission Monitoring of in Service Harbor Cranes in Order to Program Maintenance Operations and Insure Safety Management
A. Proust111, R. Kefferstein2, O. Al Haj12, D. Crucq2
1Mistras Group, SAS19, Sucy-en-Brie, France
2ArcelorMittal Fos-sur-Mer, Fos-sur-Mer Cedex , France
Acoustic emission, Data processing, Fatigue, Inspection Qualification, Monitoring, Stress

Acoustic Emission
Acoustic Emission
The combined use of millimeter wave imaging and acoustic emission for the damage investigation of glass fiber reinforced polymer composites
K. Kalteremidou, A. Pourkazemi, Y. El idrissi, Y. Morabet, G. He, J. Stiens, L. Pyl6, D. Van Hemelrijck18
aDepartment of Mechanics of Materials and Constructions bDepartment of Electronics and Informatics cDepartment Mechanics of Materials and Constuctions; Vrije Universiteit Brussel (VUB) 54, Brussel, Belgium
Acoustic emission, Composite materials, Terahertz imaging

Acoustic Emission
Additive Manufacturing – characterisation
Investigation of fundamental ultrasonic propagation characteristics in NDT of Electron Beam Deposition additive manufactured samples
O. Tofeldt13, S. Pierce26, G. Smillie2, W. Kerr3, G. Flockhart2, C. MacLeod26, R. Blue2, A. Gachagan211, T. Stratoudaki24, J. Olsson12, D. McMahon32
1Production Technology Center (PTC); University of West2, Trollhättan, Sweden
2aDepartment of Electronic & Electrical Engineering bCentre for Ultrasonic Engineering cSchool of Electrical and Electronic Engineering; University of Strathclyde35, Glasgow, Scotland, United Kingdom
3Department of Electronic & Electrical Engineering; Advanced Forming Research Centre (AFRC)2, Renfrewshire, United Kingdom
Propagagation and scattering, Ultrasonics

Additive Manufacturing – characterisation
Additive Manufacturing – characterisation
Subsurface Residual Stress Analysis in Ti-6Al-4V Additive Manufactured Parts by Synchrotron X-ray Diffraction
T. Mishurova16, K. Artzt24, S. Cabeza38, G. Requena211, G. Bruno122, J. Haubrich23
1BAM Federal Institute for Materials Research and Testing1327, Berlin, Germany
2German Aerospace Center (DLR)8, Cologne, Germany
3Institut Laue-Langevin6, Grenoble, France
Stress, Tomography, X-ray diffraction

Additive Manufacturing – characterisation
Additive Manufacturing – characterisation
An Assessment of Bulk and Surface Residual Stress in Selective Laser Melted Inconel 718
T. Thiede12, S. Cabeza28, T. Mishurova16, N. Nadammal12, A. Kromm14, J. Bode13, C. Haberland3, G. Bruno122
1aTest Devices and Equipment bDivision 8.5 Micro NDE; BAM Federal Institute for Materials Research and Testing1327, Berlin, Germany
2Institut Laue-Langevin6, Grenoble, France
3Siemens PG 12, Berlin, Germany
Metals, Research, Stress, Stress visualization

Additive Manufacturing – characterisation
Additive Manufacturing – radiographic methods
Optimised Inspection of Complex Geometries
N. Brierley7
The Manufacturing Technology Centre (MTC)6, Coventry, United Kingdom
Radiographic Testing (RT), data processing, image processing, research, Radiography, Theoretical Modelling

Additive Manufacturing – radiographic methods
Additive Manufacturing – various methods
Simulation of NDT methods for Additive Manufacturing of composites
A. Martins, M. Carvalho, J. Cardoso, T. Santos10
Department of Mechanical and Industrial Engineering; NOVA University of Lisbon11, Caparica, Portugal
Composite materials, Thermography

Additive Manufacturing – various methods
Additive Manufacturing – various methods
Non-Destructive Testing for Composites Produced by Additive Manufacturing
A. Pontes1, C. Simão2, J. Nunes1, J. Pinto3, J. Viana1, M. Ferreira3, T. Santos210
1Department of Polymer Engineering; University of Minho5, Guimarães, Portugal
2Department of Mechanical and Industrial Engineering; NOVA University of Lisbon11, Caparica, Portugal
3Department of Physics; University of Aveiro3, Aveiro, Portugal
Composite materials, Eddy currents, Thermography

Additive Manufacturing – various methods
Additive Manufacturing – various methods
Non-destructive inspection (NDI) of additive manufactured (AM) metal alloys
A. Ngo, K. Ke, W. Liew, H. Liu
A*STAR Institute of Materials Research and Engineering (IMRE)5, Singapore, Singapore
Aerospace, Defects, Infrared, Metals, Thermography, Ultrasonics

Additive Manufacturing – various methods
Aerospace
Migrating from traditional to Digital Radiography in Aerospace
L. Schulenburg7
VisiConsult X-ray Systems & Solutions GmbH11, Stockelsdorf, Germany
EMAT, Iron and steel industry, Metals, Pipes, Sensors, Ultrasonics

Aerospace
Aerospace
Adaptive Focusing Technology for the Inspection of Variable Geometry Composite Material
E. Grondin6
Olympus Scientific Solutions Americas, Canada29, Quebec City, Quebec, Canada
Aerospace, Composite materials, Ultrasonics

Aerospace
Aerospace
Challenges and New Developments for Air Coupled Ultrasonic Imaging
W. Hillger72, A. Szewieczek20, D. Ilse29, L. Bühling31
Institute of Composite Structures and Adaptive Systems; Hillger Ing. Büro56, Braunschweig, Germany
Aerospace, Air-coupled ultrasound, Novel Techniques, Sensors, Transducers, Ultrasonics

Aerospace
 
Page:
 -1-   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window