- since 1996 -
|NDT.net Issue - 2011-09 - NEWS |
|MatriX Technologies expands its NDT product line with the XCT-1000, a compact and flexible configurable CT X-ray system
Feldkirchen, June 2011 - The new MatriX XCT-1000 system is especially designed for the manual CT analysis and offers highest possible flexibility for specific customer requirements. Depending on the customer application the system can be configured with different high resolution x-ray tubes ranging from 160kV to 225kV and with flat panel detectors with inspection areas up to 200mm x 200mm. The XCT-1000 is capable of performing the classical X-ray transmission inspection as well as the CT X-ray analyzing.
The industrial computer tomography guarantees complete, non-destructive analysis of objects with inner structures that are difficult or impossible to access. The compact, manual XCT-1000 system (floor space: 1500mmx850mm) is ideally suitable for the operation in a laboratory environment (product development) as well as for material analysis (void and crack detection) of small series in the production environment of castings made of light metal, plastic or ceramic. The XCT-1000 System is equipped with a highly precise 5 axes motion system. The checkable volume supported is 400mmx400mmx300mm. To avoid gravitation influences the systems x-ray beam path runs in horizontal direction and the rotary table does have a vertical rotary axis.
With its horizontal beam path and the rotary table with Z-axis motion, the XCT-1000 system meets all requirements to perform high quality CT techniques. Those are Fraunhofer Helix CT technique for artifact reduced high-performance CT and alternatively the Siemens Cera TXR (Theoretically eXact Reconstruction) technique for theoretically exact reconstruction providing reduced reconstruction times up to 50%. Both methods are optionally available in combination with the standard MIPS-CT setup and offer a significantly higher CT quality, free of Feldkamp artifacts.
For visualization of the volume data the approved Volume Graphics VGStudioMax2.1 Software is used. The 2D and 3D analysis tools available are e.g. manual measuring of voids, porosities and wall thickness in volume as well as in slice images. The Matrix proprietary MIPS_NDT Software is used for control of the XCT-1000 system. It can be optionally extended by the modules MIPS_NDT analyzer and MIPS_NDT inspect. MIPS_NDT analyzer is used to perform manual analysis and image processing in X-ray images and slices. MIPS_NDT inspect is a software for automatic defect analysis with good/bad classification of X-ray iamges and slices. It supports also automated inspection of production batches.
About MatriX Technologies:
Direct contact at MatriX Technologies: