where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network


NDT.net Issue - 2012-10 - NEWS

GE's phoenix datos|x 2.2 Software Allows Complete Automation of the Computed Tomography 3D Metrology and Failure Analysis Process Chain


GE Sensing & Inspection Technologies GmbH ,Germany296, Hürth [Germany]
NEWS  
NDT.net Journal
Issue: 2012-10
Provides up to 9 Times Faster Volume Reconstruction

Wunstorf, Germany. – 20 August 2012. — The phoenix datos|x 2.2 new-generation computed tomography (CT) software from the Inspection Technologies Business of GE Measurement & Control, features fully automated data acquisition and volume processing to allow high-resolution precision metrology and failure analysis tasks to be performed significantly faster, with minimal operator training. Users of GE’s phoenix|x-ray high-resolution CT systems in a wide variety of industries and academic institutions can now benefit from a combination of time and cost effectiveness as well as from improved reproducibility of 3D measurement and failure analysis results because of the minimization of operator influence.

As Oliver Brunke, CT product manager, explains, “With phoenix datos|x 2.2, the whole scan and reconstruction process runs without any operator interaction and 3D failure analysis or metrology tasks performed with third party programs can be executed automatically. The click & measure|CT functionality allows display and analysis of the 3D results on the screen in just three steps, so that operator skill requirements are dramatically reduced, while CT analysis time is up to 5 times faster compared with the previous datos|x 1 software version.”

The intuitive graphical user interface of the new software ensures easy usage and a fast learning curve, including automated system calibration and monitoring functions for tube, detector etc. A process flow orientated function tool bar allows step-by-step workflow set-up and CT results display has been significantly improved as the 3D volume is shown not only in 2D axis views but also in a 3D render mode.

Since the entire process of the CT data acquisition through volume reconstruction to implementation of the measurement runs completely automatically, it is possible to conduct the first sampling of a complex component in less than 60 minutes. This makes dimensional measurement with CT an effective tool for many tasks in production process monitoring such as the manufacture of plastics and metal castings and precision components like injection nozzles. Particularly complex part geometries with inaccessible or hidden features can be measured with CT in many cases faster than with conventional CMM.

Compared with the current datos|x version, the new velo|CT module offers up to 9 times faster CT volume reconstruction. Depending on the volume size, the CT results are now ultra quick available in the order of seconds or minutes. Another effective tool for accelerated high throughput laboratory and production oriented CT tasks is the new batch|CT module: Due to pre programmed multi-object scans with no further interaction, it allows the degree of system usage to be enlarged by up to 20-30 % by performing various automatic CT scans and evaluations outside of the operator working time.

GE Sensing & Inspection Technologies GmbH ,Germany

More of GE Sensing & Inspection Technologies GmbH ,Germany published in NDT.net
2018-08-01: Ultrasonic inspection of adhesive joints using flexible linear arrays
2018-08-01: Advanced manufacturing & testing methods for CLAD pipes
2018-08-01: UT of Rails Using Phased Array
2018-08-01: Modeling of 3D Electro-Mechanical Wave Propagation in 1-3 Piezocomposite based Ultrasonic Sensors: Simulation and Experimental Comparison
2018-08-01: UT of Aviation Materials with 2D Arrays applying DDF in Transmission and Reception
2018-08-01: Combined UT of Round and Hexagonal Bars
2018-08-01: Influence of defect characteristics on inspection reproducibility of automated testing machines
2018-08-01: Automated UT of seamless steel pipes with matrix arrays
2018-06-01: Developments in 2D and CT X-Ray Inspection of Light Alloy Castings for Production
2018-06-01: Efficient PA UT Inspection of Austenitic Welds “in Lieu of RT”
All 442 Articles & News of GE Sensing & Inspection Technologies GmbH ,Germany in NDT.net


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|