where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDT.net Issue - 2016-07 - NEWS

Tecnatom Presents its Latest Developments in the 19th World Conference of Non Destructive Testing in Munich

Tecnatom S.A.93, Madrid, Spain
NDT.net Journal
Issue: 2016-07
The Spanish multinational shows its advances in non - destructive testing (NDT), not only in the aerospace sector, but its multiple capabilities globally on NDT, such as inspection systems, services, R&D and training.

Tecnatom participates in this worldwide conference with its own booth and presents three oral presentations within the scientific programme, two of them focus on nuclear field and another one on the aerospace sector.

Its French subsidiary, M2M, also attends the 19th World Conference on Non-Destructive Testing, held in Munich from 13 to 17 June.

Munich, 15 June 2016.- These days Munich hosts the 19th World Conference on Non- Destructive Testing (WCNDT), the most important event on NDT and its application in different industry sectors. More than 2,200 experts are participating in this important congress, which has a large exhibition area (276 exhibitors), an intensive programme of lectures (673 in 144 sessions) and a schedule of meetings and workshops.

Tecnatom participates in the 19th WCNDT with its own booth and three papers by its research staff. Two of them focused on the nuclear sector: Check Valve Diagnosis by Sectorial Scanning Phased Array Ultrasonic Technique and Ultrasonic Testing of ITER Toroidal Field Coil Cases Closure Welds. The third and final presentation will focus on aerospace: Laser Ultrasonics Inspections of Aeronautical Components by Means of Robotic Systems.

With over 50 years experience in NDT, Tecnatom is showing its latest developments in this field, both inspection systems, services and training, as its progress in NDT through R&D. The Tecnatom Group is not only present at the 19th WCNDT with its parent company; M2M, one of the two French subsidiaries of Tecnatom, also attends the event with its own stand, which will show the upgrades of GEKKO, the portable phased-array ultrasonic flaw detector inspection system.

About Tecnatom
Tecnatom is a Spanish multinational engineering, present in 32 countries with over 50 years experience in NDT. The company develops its own state-of-the-art technology in ultrasonic inspection that is permanently updated and improved through R&D. Tecnatom Group has established itself as a leading company in supplying inspection systems, equipment and services mainly based on ultrasonics, Eddy current, thermography and other NDT techniques in nuclear and aviation industry, among other markets.
Tecnatom Group has managed to position itself as a benchmark company in the supply of inspection systems, providing its technology to Airbus, Boeing, Bombardier and Embraer, the big four western aerospace companies, in addition to the Russian United Aircraft Corporation (UAC) and the Asian COMAC. In addition to these major manufacturers Tecnatom systems are found in many others Tier 1 and Tier 2, on four continents.

Tecnatom Communication Office: Celia Ruiz: 00 34 954 62 27 27/00 34 654 74 64 73, www.tecnatom.es

More of Tecnatom S.A. published in NDT.net
2018-08-01: On the Inspectionability of curved CFRP Vessel by Active Infrared Thermography
2018-08-01: Positioning of Indications in Composite Materials by Infrared Thermography
2018-08-01: Development of On-line Damage Monitoring System for Evaluation of Composite Cockpit during Static/Fatigue Structural Tests
2018-08-01: Wireless 3D localization applied to the manual ultrasonic inspection of complex-geometry composite components.
2018-08-01: Ultrasonic Phased-Array advanced techniques for the inspection of circumferential welds in small diameter pipes
2018-08-01: PEC application for corrosion detection under insulation in carbon steel pipes and tanks
2018-08-01: Laser ultrasonic inspections are ready for production in Europe
2018-06-01: More on the reliability of small diameter nozzles inner radius inspection qualification
2018-04-01: Tecnatom Shows at JEC World its Wireless Positioning Technology for Inspection in The Aerospace Sector
2018-01-01: Tecnatom has Attended JEC ASIA 2017 In Korea, one of its Main Customers in Robotic Inspections Systems
All 93 Articles & News of Tecnatom S.A. in NDT.net

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window