where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network


NDT.net Issue - 2017-08 - NEWS

Sonotron NDT announces the new release of the RADIUS Scan PA Modality inspection SW application


Sonotron NDT63, Rehovot [Israel]
NEWS  
NDT.net Journal
Issue: 2017-08
[+]
Initially created for the quick and simple compression wave inspection of various cornered (bended) parts made of composites, metals. etc from the inner radius areas the ISONIC RADIUS-Scan software application for the ISONIC series PA instruments (ISONIC 3510, ISONIC 2010, ISONIC 2009 UPA-Scope) is based on the use of regular Linear Array Probes equipped with the wedges (delay lines) shaped according to the inner surface. Upon the geometry of the inner surface is entered the beam steering is performed inside of the wedge (delay line) in a manner providing entering of ultrasonic wave at normal to the surface within entire covered area. Covering the material based on the EQUPAS (Equalized Phased Array inspection Sensitivity) approach the instrument provides individually adjusted gain for every focal law along with the DAC signal evaluation and image normalization; the true-to-geometry image is formed on the instrument’s screen in real time whilst inspecting the desired cross-sections of the material in discrete shots or scanning the area continuously with C-Scan recording. The inspection is featured with 100% raw data recording and 3D imaging:

In the new release the ISONIC RADIUS Scan software is featured with the ability of the inspection of hollow rotor shafts, thick wall tubes, and the like from the bored / ID surface. Use of VAUT (Video Aided Ultrasonic Testing) technology allows permanent visual monitoring of the bored / ID surface whilst scanning and recording of the video information along with the ultrasonic inspection data synchronously into the same inspection results file; the operation is illustrated by the short videos below

Related Links

Sonotron NDT

More of Sonotron NDT published in NDT.net
2018-11-01: Toggling between S-Scan and FMC/TFM coverage whilst inspecting simple and complex geometry welds and other structural elements
2018-11-01: PAUT and Conventional Modality for the Materials Characterization using Frequency Domain Signal Presentation (FFT)
2018-10-01: Short Range Guided Wave Inspection – Annular Rings with Narrow Outer Chime
2018-09-01: MULTIGROUP T – the new inspection modality combining live S-Scan and FMC/TFM coverage out of the same PA Probe
2018-08-01: Complete PAUT Solution for the In-Service Inspection of Annular Ring Plates in the Above Ground Storage Tanks
2018-07-01: Sonotron NDT Brings the Annual Verification (Calibration) of PAUT Instruments to the Overnight Automatic Procedure at the Premises of the Instrument Owners
2018-06-01: PAUT: Rapid Detection and Evaluation of the Fatigue Cracks in the Web-to-Outboard End Pad Fillet Radius at Lower Wing Attach of an Aircraft
2018-05-01: Sonotron NDT introduces the upgraded version of ISONIC PA AUT platform
2018-05-01: Automatic finding, sizing, and alarming of the defects upon PAUT scanning completed
2018-04-01: Sonotron NDT expands the applications portfolio for PAUT of welds
All 63 Articles & News of Sonotron NDT in NDT.net

More Videos in NDT.net


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|