where expertise comes together - since 1996

Web's Largest Portal of Nondestructive Testing (NDT)
Open Access Database (Conference Proceedings, Articles, News), Exhibition, Forum, Network


NDT.net Issue - 2018-04 - NEWS

Inspection, Measuring & Testing


Controle Mesure Systemes (CMS)10, La Charmee [France]
NEWS  
NDT.net Journal
Issue: 2018-04
Contrôle Mesure Systèmes will exhibit at TUBE Dusseldorf from 16th to 20th April 2018 stand 6G18.

Specialist for nearly 30 years in nondestructive testing methods, we propose a large range of NDT equipments, especially for tubes and bars inspection, on or off line, in ferrous or nonferrous metal.

The 2 mains products of CMS are :

  • Eddy current rotating heads RotoETscan : for tube inspection, diameter range 1 to 220mm, for surface, subsurface, punctual flaws detection.
  • Ultrasonic rotating heads RotoUTscan for tube / bar inspection welded or not, in stainless steel, titanium, zirconium, but also in carbon steel (diameter range 6 to 250 mm) for longitudinal and transversal defect detection, thickness measurement as well as OD – ID and ovalization.

These rotating heads can be combined with other CMS equipments (magnetizing units, rotating systems, support coils…), and can be installed together in a strong control bench including centering devices. Supervision software allows displaying combined signals (UT / ET) and creating inspection reports that can be used as control evidences for quality services and customers. Data stored can be recall for analysis and quality treatment. All the systems meet quality standards such as API, ASTM, DIN.

Through its products and its remote assistance, Contrôle Mesure Systèmes provides, all over the world, quality and productivity solutions for tubes applications.

[+]
Eddy current rotating head RotoETscan
for steel tubes inspection
[+]
Ultrasonic rotating head RotoUTscan
for steel alloys bars inspection

Contact:
Contrôle Mesure Systèmes : www.cmseddyscan.com
Phone : +33 3 85 94 14 14 Email : contactcms@cmseddyscan.com

Controle Mesure Systemes (CMS)

More of Controle Mesure Systemes (CMS) published in NDT.net
2018-09-01: Contrôle Mesure Systèmes will exhibit at TUBE CHINA at Shanghai from 26-29 September 2018
2017-09-01: Quality Inspection on Wires
2017-04-01: CMS recently installed its 7th ultrasonic rotating head
2016-01-01: New Product: Ultrasonic wall and concentricity measurements system
2016-01-01: Quality inspection for non ferrous products
2014-09-01: Eddy current and ultrasonic rotating heads for flaws detection
2014-02-01: Contrôle Mesure Systèmes will exhibit at Tube Dusseldorf on booth n° 6H39
2013-07-01: Contrôle Mesure Systèmes will exhibit at Tube/Wire Russia 2013 on booth n° 7.4 C 05
2008-07-01: ELEKTRIK DIRENÇ (YÜKSEK FREKANS) KAYNAKLI BORULARDA YÜZEY HATALARININ GIRDAP AKIMLARI (EDDY CURRENT) YÖNTEMIYLE KONTROLÜ<br>Detection of Surface Defects on Electrical-Resistance Welded Pipes by Eddy Currents


© NDT.net - The Web's Largest Portal of Nondestructive Testing (NDT) ISSN 1435-4934

Open Access Database, |Conference Proceedings| |Articles| |News| |Exhibition| |Forum| |Professional Network|