where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDT.net Issue - 2018-05 - NEWS
2018-05 NDT.net Journal,

Corrosion Gage and Flaw Detector Functionality in One Instrument


Olympus Scientific Solutions Americas (OSSA)219, Waltham, MA [USA]
 
NDT.net Journal
Issue: 2018-05
WALTHAM, Mass., April 23, 2018 — The new corrosion software module for the EPOCH® 6LT ultra-portable flaw detector expands the instrument’s capabilities with a suite of features to help you take fast, accurate and reproducible thickness measurements.

The corrosion software supports automatic probe recognition for all standard Olympus dual transducers, so users spend less time setting up the instrument and more time in the field. Simply plug in a supported probe, and the instrument is automatically configured for use. The software’s most powerful feature allows users to quickly switch between two modes—flaw detection and corrosion—to make corrosion inspections simple and effective.

In flaw detection mode, users get the speed and performance of an ultrasonic flaw detector to scrub for corrosion-related defects while maintaining traditional flaw detector gain linearity, gate control and 60 Hz screen update rates. Once a potential defect is located, inspectors can switch to corrosion mode with the push of a button.

Corrosion mode enables users to record precise spot measurements of remaining part thickness to thoroughly evaluate any areas of corrosion that are located during scanning. The software uses automatic gain control, V-path correction and the zero-cross measurement algorithm used on the Olympus 38DL PLUS® thickness gage to help ensure that measurements are accurate regardless of variations in signal amplitude or coupling conditions. An automatic do-zero function compensates for the time of flight through the transducer and delay line material, and two pulsing channels measure the offset from each dual transducer element to further improve measurement accuracy. Readings are saved into a color-coded grid for immediate visual feedback and easy reporting on inspections.

For more information about Olympus’ full line of nondestructive testing products, contact a sales representative or visit www.olympus-ims.com.

About Olympus
Olympus Corporation operates in industrial, medical, and consumer markets, specializing in optics, electronics, and precision engineering. Olympus is a world-leading manufacturer of innovative test and measurement solutions that are used in industrial and research applications ranging from aerospace, power generation, petrochemical, civil infrastructure, and automotive to consumer products.

Olympus Scientific Solutions Americas (OSSA)

More of Olympus Scientific Solutions Americas (OSSA) published in NDT.net
2019-04-01: Continuous Monitoring of Tightening Condition of Bolted Composite Joints Using Intrinsic Mode Functions of Acoustic Emission Signals
2019-03-01: Olympus Launches New Industrial Research Chair at Quebec Engineering School
2019-03-01: Eddy Current Array for Aircraft Engine Component Inspection
2019-03-01: Coherent Adaptive Focusing Technology for the Inspection of Variable Geometry Composite Material
2019-02-01: The (Sono)pen Is Mightier: 3 Tips to Improve Your Measurements
2019-01-01: For Goodness Sake - Assuring the Quality of Toys with Thickness Gages
2018-12-01: Train Inspection That Goes Beyond the Standard
2018-11-01: The FlexoFORM™ Scanner Provides a Complete Ultrasonic Testing Solution for Corrosion Inspection of Pipe Elbows
2018-10-01: Bridge-ing the Gap to Safety
2018-08-01: Inspection of Composite Wind Turbine Blades with Advanced Ultrasonic Phased Array Technology
All 262 Articles & News of Olympus Scientific Solutions Americas (OSSA) in NDT.net

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window