where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Beta-Version of this Page View
NDT.net Issue - 2019-03 - NEWS
NDT.net Issue: 2019-03
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)

PAUT: Corrosion detection/survey under shell/tank bottom repairs using lap-welded patch plates

Sonotron NDT68, Rehovot, Israel

Since API-653 permitted shell/tank bottom repairs using lap-welded patch plates the inspection monitoring of the corrosion under the said repairs became a desired inspection task along with the inspection of the bottom areas under the column supports, and the like. The dimensions of the patch may reach more than a meter in both measurements so the use of short range guided wave inspection (SRUT GW) is applicable practically for the whole area under the patch beside the 50…120 mm width zones adjacent to the lap welds: the defects in the said zones are not so well resolvable for SRUT GW testing due to multiple reflections from the weld structure masking the defects echoes; on the other hand the probability of appearing new pitting and cracking under the patch has been increased for these zones due to the welding process applied.

Corrosion detection and survey for the said areas is possible using new inspection software application ISONIC EXPERT Patch developed for the portable phased array (PA) instrument of ISONIC Series, either ISONIC 3510 or ISONIC 2010 or ISONIC 2009 from Sonotron NDT and the appropriate probes and accessories. ISONIC EXPERT Patch provides Multi-skip Shear Wave Volume Corrected (True-to-Geometry, True-to-Shape) sectorial scan coverage and imaging. Thus the complete solution for the detection/survey of the corrosion under lap-welded patch-plates is based on the of multi-skip shear wave volume corrected sectorial scan and SRUT GW coverage, both have been implemented using corresponding wedged PA probes through scanning along the lap joint. Use of PA modality for the SRUT GW inspection allows significantly better flexibility vs conventional thanks to the ability of performing several modes of pulsing-receiving cycles of guided wave signals (focal laws) in one pass, each covering either whole region of interest of the selected part of it.

The self-explaining video below illustrates the trials performed at the qualification trials by one of the users. The samples of the tank bottom plate with small artificial and natural defects covered by the lap-welded patch

The related links

Visit: Sonotron NDT

Feedback: ()

More from "Sonotron NDT" (5 of 67)
2019-07-01On-Line Supervising and Support of UT Technician
2019-06-01Air-to-Soil Interface: Rapid Screening and Mapping of Corrosion Damages in the Steel Pole Legs beneath the Soil Level
2019-04-01PAUT: Inspection of complex geometry fracture critical parts – manual probe manipulation
2019-02-01PAUT: In-Service Corrosion Survey of Critical Zone in the Annular Rings in the Above Ground Storage Tanks
2018-11-01Toggling between S-Scan and FMC/TFM coverage whilst inspecting simple and complex geometry welds and other structural elements
... All 67 Details >

More Videos in NDT.net

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window