- since 1996 -
|NDT.net Issue - 2008-05 - NEWS ||NDT.net Issue: 2008-05|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
New Phased Array Scarf Monitoring System from GEWaygate Technologies (former GE Inspection Technologies)313, Hürth, Germany
Scarfing is a process used in pipeline manufacture that moves a smoothing tool along the weld as it is made. This tool follows the electric arc welding machine and smoothes the surface of the weld on both the ID and OD. The tool may get worn or slip, resulting in roughness of the weld surface. These surface defects could affect the subsequent flow of any fluid in the pipe or could provide a point of weakness. The scarf monitoring system follows this tool and identifies any surface faults virtually immediately so that corrective action can be taken and minimum pipe length is lost.
The heart of the new system is the ultrasonic phased array transducer, which electronically simulates the scanning action required to provide the weld profile information. The resulting information is then fed into GEs field-proven UTxx digital flaw detection platform. This incorporates standard or phased array flaw detection channels and all the associated processing electronics to give a complete scarf monitoring and flaw inspection package.
In operation, the transducer test head assembly is mounted such that it is directly above the weld line. The mill coolant acts as the ultrasonic coupling medium. The transducer test head then uses its phased array elements to monitor the inside and outside diameter of the weld as it is being cut, at a scanning rate of up to 300 profiles/sec. Transducers and shoes are available to monitor tubes from 50 up to 500mm in diameter and typical coverage is ±25mm from the nominal weld center line.
Inspection data is displayed in true-to-scale cross-sectional profile at one or multiple monitor screens and high and low limit alarms provide warning of weld profile deviation. Intelligent dynamic software averaging techniques minimize the possibility of false readings.
The weld profile visualization system features all-electronic set-up for ease of use and repeatability and it can be installed within feet of the weld station, depending on local temperature conditions. As a result, it operates both as a process control system as well as a quality control system. It can be combined with a flaw detection system and it allows inspection traceability through a built-in data logger, which records minimum and maximum thickness readings across the weld area and strip thickness.
About GE Sensing & Inspection Technologies
Keywords: Ultrasonic Testing (UT) (4107), phased array (622), steel plant (153), tubes and pipes (255), weld (406), in-process (187), automated ultrasonic testing (AUT) (105), flaw detection (286), Dimensional Measurement (60), instrumentation (454),
Visit: Waygate Technologies (former GE Inspection Technologies)